Agoracom Blog

GGX Gold Diamond Drilling Intersects – 8.65 g/t Gold & 47.6 g/t Silver Over – 2.98 Meters  at COD Vein $GGX.ca $K.ca

Posted by AGORACOM at 9:16 AM on Wednesday, July 25th, 2018

 

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png
  • Holes COD18-31 to COD18-33 which tested the COD Vein on GoldDrop Property
  • 8.65 grams per tonne (g/t) gold, 47.6 g/t silver and 37.3 g/t tellurium over 2.98m

GGX Gold Corp. (TSX-v: GGX), (OTCQB: GGXXF), (FRA: 3SR2)(the “Company” or “GGX”) is pleased to announce the receipt of the additional analytical results from its diamond drilling program on the Gold Drop property, located near Greenwood, B.C. Drill core analytical results have been received for 2018 drill holes COD18-31 to COD18-33 which tested the COD Vein. The COD gold bearing vein is located in the Gold Drop Southwest Zone.

To view the graphic in its original size, please click here

A highlight from these analytical results is an intersection of 8.65 grams per tonne (g/t) gold, 47.6 g/t silver and 37.3 g/t tellurium over 2.98 meter core length in hole COD18-33, including 13.8 g/t gold, 46.2 g/t silver and 47.8 g/t tellurium over 0.90 meter core length. This gold-bearing interval (quartz vein and adjacent altered granodiorite) in hole COD18-33 is located at approximately 50 meter vertical depth and approximately 100 meters southwest of the area of 2017 trenching.  COD18-33 is located approximately 170 meters southwest of hole COD17-14 which intersected the 4.59 g/t gold over 16.03 meters, including 10.96 g/t gold over 5.97 meters (News Release of September 7, 2017).

The 2018 drilling program to date has been mainly focused on testing and defining the COD Vein, a Dentonia/Jewel style quartz vein. Trenching during 2017 exposed the northeast – southwest striking COD Vein for over 160 meter strike length. The 2018 drilling program has also tested the continuation of the Everest Vein, which is located approximately 600 meters southwest of the COD Vein worksite. The Everest Vein was first discovered by Company prospectors during the 2017. Chip samples collected in 2017 across the approximate 0.4 meter wide vein exposure returned up to 52.8 g/t gold and 377 g/t silver while a grab sample of a quartz vein boulder broken off the outcrop by the excavator returned 81.8 g/t gold and 630 g/t silver (News Release of August 21, 2017).

Previous drill core analytical results from the 2018 drilling program are reported in News Releases of May 29, June 14, June 27, July 11 and July 19. The highlight of the 2018 drilling program to date is 14.62 g/t gold, 150.2 g/t silver and 102.0 g/t tellurium over 2.1 meter core length in hole COD18-3 at the COD Vein.

The analytical results listed below are highlights from drill holes DDCOD18-31 to DDCOD18-33 (intersections greater than 1 g/t gold), testing the continuation of the COD Vein south-southwest of the 2017 trench. Since true widths cannot be accurately determined from the information available the core lengths (meters) are reported. The Gold, Silver and Tellurium analyses are reported in grams per tonne (g/t).

Hole ID From (m) To (m) Interval Length (m) Au (g/t) Ag (g/t) Te (g/t)
COD18-32 44.09 45.60 1.51 3.67 67.2 30.4
COD18-33 58.52 61.50 2.98 8.65 47.6 37.3
including 58.52 59.93 1.41 7.91 26.9 30.9
including 59.93 60.60 0.67 3.3 93.2 36.9
including 60.60 61.50 0.90 13.8 46.2 47.8

 

The interval of 44.09-45.60 meters in COD18-32 is quartz vein / quartz breccia with some silicified granodiorite in the lower part of the section. The interval of 58.52-61.50 meters in COD18-33 is altered granodiorite (58.52-59.93 meters) and quartz vein (59.93-61.50 meters).

Drill core from the 2018 program was geologically logged and sampled. Drill core was sawn in half with half core samples submitted for analysis and remaining half core stored in a secure location. Core samples were delivered to the ALS Minerals laboratory in Vancouver to be analyzed for gold by Fire Assay – AA. The samples were also analyzed for 48 Elements by Four Acid and ICP-AES / ICP-MS. Quality control (QC) samples were inserted at regular intervals.

To view the graphic in its original size, please click here

David Martin, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

To view the Original News release with pictures please go to the website or contact the company.

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

[email protected]

Investor Relations:

Mr. Jack Singh, 604-488-3900   [email protected]

“ We don’t have to do this, we get to do this “

“The Crew”

Tags: , , , , , ,

Comments are closed.