AGORACOM Small-cap Investor Relations Blog

Cardston, Alberta–(Newsfile Corp. – October 31, 2018) – American Creek Resources (TSXV: AMK) (OTC Pink: ACKRF) (the “Company” or “American Creek”) is pleased to report its JV partner Tudor Golds results from four holes of the nine-hole 2018 drill program on the Copper Belle zone of the Company’s Treaty Creek property, in the “Golden Triangle” area of north-western BC.

The deep drilling program is now finished for the season and results of core sampling have been received for six of the nine holes completed. The first two holes were reported in the August 23 news release.

Walter Storm, President and CEO, stated: “As the assay results come in from our deep drilling program at Copper Belle, the gold mineralized zone is really taking shape. We are seeing thick intervals of good gold grades in our northernmost hole reported to date. This indicates to us that the strong Copper Belle mineralization may continue to the north-northeast of our current drilling.”

Holes CB-18-34 and 37B were drilled to the northwest at angles of approximately 75 degrees into the central part of a strong magnetic high (see map below) and returned broad intervals of gold mineralization. Holes CB-18-33B and 35B, located approximately 150 m farther to the west, were also drilled northwesterly; however, the gold values were lower in these two holes. The objective of the 2018 drill program was to better define the extent of the Copper Belle zone and the results from these holes have accomplished that. Excellent gold intercepts from our northernmost hole reported to date and moderately strong magnetic intensity extending north-northeasterly from the north end of the drill grid, indicate that the zone has good potential to continue in that direction.

Gold, silver and copper results for holes CB-18-33B, CB-18-34, CB-18-35B and CB-18-37B , as well as hole 37, which was lost at 131.2 m, but re-drilled as 37B, are summarized in the table below.

CB-18-34 had two wide intervals of gold mineralization; 0.554 g/t Au over 178.5 m, which included 0.830 g/t Au over 75.0 m and a lower zone of 0.344 g/t Au over 94.5 m. The gold mineralized intervals are primarily hosted by andesitic tuff and fragmental rocks that are moderately silicified, chlorite and sericite altered, and cut by abundant fine quartz-carbonate veins. Pyrite content averages about 10%, occurring as disseminations and local coarse masses in the host rocks, as well as within some of the quartz-carbonate veins, with rare chalcopyrite and arsenopyrite.

CB-18-37B also intersected two zones of mineralization over impressive widths; the upper zone averaged 0.772 g/t gold over 43.5 meters and the lower zone returned 0.486 g/t Au over 482.0 m, which included intervals of stronger alteration and mineralization, such as 0.790 g/t gold over 175.5 meters. The host rocks are similar to those in hole CB-18-34 and higher gold grades are associated with increased silicification, potassic alteration and pyrite content.

* All assay values are uncut and intervals reflect drilled intercept lengths.
* True widths of the mineralization have not been determined.

The nine holes drilled in 2018 covered an area measuring approximately 370 meters by 250 meters, to depths of 600 to 900 meters. Based on the wide gold intervals received to date, the results are expected to considerably increase the range of potential ounces of gold from the 1.8 to 1.9 million ounces contained within 50 to 45 million tonnes grading 1.12 to 1.35 g/t Au determined from the drill results prior to 2018. A new range of gold ounces and grades will be determined, incorporating all drill results to the end of 2018 drilling, once the final assays are received and compiled.

The 2018 drilling has now extended the known length of the porphyry-style mineralized system for over 1100 meters. For locations of the 2018 and other holes in the Copper Belle area that are overlain on Total Magnetics contours, please view the map below. The Copper Belle zone has an elongate north-northeast trend, dipping at a relatively flat angle to the northwest. Mineralization may be related to an extensive north-northeast trending tectonic zone, similar to the distribution of the four KSM deposits on Seabridge’s property that are located along a ten kilometer length of the Sulphurets Thrust Fault zone.

Copper Belle Drill Hole Locations on Total Magnetic Intensity
(“Warmer” Colours Indicate Higher Magnetic Intensity)

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/4494/40681_1bc2cd1aa430090c_001full.jpg

QAQC

Drill core samples were prepared at ALS Global’s Preparation Laboratory in Terrace, BC and assayed at ALS Global’s Geochemical Laboratory in North Vancouver, BC. Analytical accuracy and precision are monitored by the submission of blanks, certified standards and duplicate samples inserted at regular intervals into the sample stream by Tudor Gold personnel. ALS Global Laboratories quality system complies with the requirements for the International Standards ISO 17025: 2005.

QP

The Qualified Person for the Treaty Creek results in this new release is James A. McCrea, P.Geo., for the purposes of National Instrument 43-101. He has read and approved the scientific and technical information that forms the basis for the disclosure contained in this news release.

About American Creek

American Creek holds a strong portfolio of gold and silver properties in British Columbia.

Three of those properties are located in the prolific “Golden Triangle”; the Treaty Creek and Electrum joint venture projects with Tudor (Walter Storm) as well as the 100% owned past producing Dunwell Mine.

The Company also holds the Gold Hill (drill program currently running), Austruck-Bonanza, Ample Goldmax, Silver Side, and Glitter King properties located in other prospective areas of the province.

For further information please contact Kelvin Burton at: Phone: 403 752-4040 or Email: [email protected]. Information relating to the Company is available on its website at www.americancreek.com.