Agoracom Blog Home

Posts Tagged ‘#graphitestocks’

Graphene: the nano-sized material with a massive future

Posted by AGORACOM-JC at 8:23 AM on Tuesday, April 30th, 2013

(CNN) — Ever since it was discovered in 2004, graphene has been hailed as a natural wonder of the materials world destined to transform our lives in the 21st century.

Graphene’s amazing properties excite and confound in equal measure. How can something one million times thinner than a human hair be 300 times stronger than steel and 1,000 times more conductive than silicon?

CNN Labs asked the head of MIT’s graphene research department, Tomas Palacios, to explain why graphene is such a special material and what we can expect it to do for us in the future.

CNN: What is graphene?

Tomas Palacios (TP): Graphene is a one-atom thick layer of carbon atoms arranged in a honeycomb lattice.

This special atomic arrangement gives graphene truly unique properties. For example electrical currents in graphene move faster than in any other material we know of.

Products such as cell-phones will be integrated into the likes of the clothes, pieces of paper and in windows
Tomas Palacios

Heat can also move in graphene very fast and it is the best thermal conductor that we have. On top of this, graphene is the thinnest material in the world as well as the strongest, much stronger than steel and, of course, much lighter.

Finally, because it is only one atom thick, it is perfectly transparent and flexible.

CNN: What applications will it have?

TP: The very first application where graphene is going to be used is probably as a replacement for (the relatively expensive metal) indium selenide in solar cells.

Read: ‘Mantis:’ the monster-sized hexapod robot

After that, I think we will see a new array of communication devices that don’t just use graphene but which also use other two-dimensional materials.

Products such as cell phones will be integrated into the likes of the clothes, pieces of paper and in windows.

Another direction is transparent displays. Basically we are going to have electronic displays embedded almost everywhere, in the windows, in our glasses, in the walls, everywhere.

To do this we need very thin materials that are also transparent and graphene could be that material.

CNN: When will products containing graphene be available?

TP: It depends on the specific application. I believe that the use of graphene in solar cells, displays and so on is probably going to be in the marketplace in a couple of years.

Read: ‘Afterlife’ feels ‘even more real than real’

More complex applications such as computers or cell phones will probably take longer, maybe within five and ten years.

CNN: What challenges remain for researchers?

TP: One important challenge facing graphene is the way the material is developed.

Graphene was isolated for the first time using the Scotch Tape technique (where ever thinner strips are peeled off a block of graphite using sticky tape) and the quantities we can make in large areas still lag behind this method.

The ambition is that one day graphene will be fabricated in the same way that you print newspapers
Tomas Palacios

There has been a lot of work to try and enhance the manufacturability of graphene and there are a few techniques that look very promising but they are not completely mature yet.

The second challenge is that graphene is a material that is only one atom thick. Anything that you do to it is going to impact its properties.

Read: Flying robots learn mind-boggling tricks

We still need to understand better how to fabricate graphene devices and how to be gentle enough not to (break) the formula.

CNN: Are production methods improving?

Recently, Samsung Electronics has demonstrated a single layer of graphene which is 30 inches in diameter. So in just a few years we have gone from micro-meter sized flakes all the way to 30 inches.

The ambition is that one day graphene will be fabricated in the same way that you print newspapers — in a roll to roll process using the same kind of equipment. This will change the entire economics of the electronics industry.

CNN: Are there any other materials like graphene?

TP: Graphene was the first two-dimensional material to be discovered, but it is not the only one. Now there are more than 10 materials that are all two-dimensional with complimentary properties that could be integrated with graphene to provide extra functionality.

Boron nitride for example is also one-atom thick and instead of being a conductor it is an insulator (of heat), the best insulator we know. If you go to three atoms thick we have another material called molybdenum disulfide which is a semi-conductor, like silicon, but lighter and stronger.

These materials can then be combined in order to fabricate completely new material structures that don’t exist in nature. I think that that is a very powerful proposition.

I am completely convinced that graphene is going to end up changing our lives
Tomas Palacios

CNN: When will graphene-based products hit main street?

TP: If you look at how long it traditionally takes new materials to make an impact in the market, it typically takes around 20 years.

We need to be patient but things seem to be moving faster than with other materials.

I think the next couple of years will see quite significant improvements in the growth techniques and synthesis of two-dimensional materials.

At a basic research level we are going to see an emphasis on trying to understand what happens when you stack these materials one on top of the other.

That is going to enable a lot of new understanding which will enable completely new devices.

I am completely convinced that graphene is going to end up changing our lives. Exactly how, I don’t know and I don’t think anyone can know for sure but there is nothing thinner, stronger or more suitable to conduct electricity and that has to be useful for many important things.

Source: http://www.cnn.com/2013/04/29/tech/graphene-miracle-material/index.html?hpt=hp_c3

Mason Graphite announces robust preliminary economic assessment results, featuring 22 years of production at 27.4% Cgr and an IRR of 33.7%

Posted by AGORACOM-JC at 10:43 AM on Monday, April 22nd, 2013

MONTREAL, April 22, 2013  – Mason Graphite Inc. (“Mason Graphite” or the “Company”) (TSX.V: LLG) reports strong results of a Preliminary Economic Assessment study (“PEA”) for the development of its 100%-owned Lac Guéret graphite project in northeastern Quebec.

Financial Highlights
● Initial direct capital costs of $89.9M
● Production costs of $390 per tonne of finished product
● $364M pre-tax NPV (8% discount); $283M pre-tax NPV (10% discount)
● 33.7% pre-tax Internal Rate of Return
● Payback period of 2.5 years
● 22-year mine life
● Average sales price of $1,525 per tonne
Operational Highlights
● Annual production of 50,000 tonnes of graphite concentrate
● 27.4% average LOM graphite content in the mineralization
● Graphite recovery above 96%
● Up to 96.4% Cgr of finished product purity
● Stripping ratio of 0.76:1

 

Cautionary Note: A PEA is preliminary in nature and includes Inferred Mineral Resources, which are considered too geologically speculative to have mining and economic considerations applied to them that would enable them to be categorized as mineral reserves. Mineral resources that are not mineral reserves do not have demonstrated economic viability.  There is no certainty that the reserves development, production, and economic forecasts on which the PEA is based will be realized.

Benoît Gascon, CEO of Mason Graphite commented, “We are very pleased with the excellent results of the PEA, which demonstrates a low cost project with robust economics. Our senior management team has decades of cumulative experience producing and selling graphite, and with our partners, we have delivered a technically sound, realistic, and highly profitable project. The completion of the PEA is a significant milestone for the project and demonstrates that the Lac Guéret mine has the potential of becoming a reliable and long term global supplier of high quality graphite. We now intend to proceed with the next phase of development in order to bring this exceptional asset one step closer to production.”

The PEA was prepared by Met-Chem Canada Inc. (Montreal, Quebec), with contributions from SGS Minerals Services (“SGS”) (Lakefield, Ontario) for the process development; both are independent leading firms in the mineral processing industry. Unless otherwise noted, all monetary figures presented in this document are in Canadian dollars.

MINERAL RESOURCES

Excellent mineral growth potential expected

The PEA was prepared using data from the July 2012 mineral resource estimate, which consists of 0.3 million tonnes at 24.4% Cgr in the Measured category, 7.3 million tonnes at 20.2% Cgr in the Indicated category and 2.8 million tonnes at 17.3% Cgr in the Inferred category (see Technical Report dated July 3, 2012 for details). This mineral resource is hosted on a small portion of the GC Zone, as shown in figure 1.

July 2012 Mineral Resource Estimate

Categories Unit Tonnes Grade (% Cgr)
Measured (M) Unit 1 (4 to 10% Cgr)
Unit 2 (10 to 27% Cgr)
Unit 3 ( > 27 % Cgr)
31,200
122,800
144,900
7.82
14.85
36.72
All units 298,900 24.39
Indicated (I) Unit 1 (4 to 10% Cgr)
Unit 2 (10 to 27% Cgr)
Unit 3 ( > 27 % Cgr)
2,672,500
2,089,200
2,535,300
8.09
16.83
36.2
All units 7,297,000 20.24
M + I Unit 1 (4 to 10% Cgr)
Unit 2 (10 to 27% Cgr)
Unit 3 ( > 27 % Cgr)
2,703,700
2,212,000
2,680,200
8.67
18.30
36.96
All units 7,595,900 20.40
Inferred Unit 1 (4 to 10% Cgr)
Unit 2 (10 to 27% Cgr)
Unit 3 ( > 27 % Cgr)
1,272,600
714,200
771,500
7.56
17.54
33.1
All units 2,758,300 17.29

Since the completion of the July 2012 mineral resource, the Company has completed 26,500 metres of additional drilling. This program consisted of 145 drill holes around the resource envelope in the GC Zone and 18 drill holes in the GR Zone to test for continuity of mineralization (see Nov. 21, 2012 and Feb. 28, 2013 and April 3, 2013 press releases). The program successfully identified mineralization with similar grades in both zones.

After the 22-year mine life proposed in the PEA, 5.6 million tonnes of mineralization grading 13.1% of graphite will still remain as part of the 2012 mineral resource envelope. An updated mineral resource is currently underway by Roche Ltd. Consulting Group, which will include 145 new drill holes from the GC Zone; the Company expects that the addition of the latest GC Zone results in the upcoming mineral resource will significantly increase this quantity and grade and, consequently, will further increase the mine life beyond the one contemplated in the PEA.

COMMERCIAL SALES & REVENUES

50,000 tonnes of saleable graphite annually; $76.2 million in annual revenues

The Lac Guéret mine will produce an average of 50,000 tonnes of saleable graphite annually. At an average sale price of $1,525 per tonne, this represents $76.2 million in annual revenue. The flake size distribution and associated prices are summarized in the table.

Graphite flake distribution and price assumptions

Product Category Tonnes of Product Price per Tonne Annual Revenue
+50 mesh 9,200 $2,200 $20,240,000
+80 mesh 6,095 $2,000 $12,190,000
+150 mesh 7,136 $1,500 $10,703,000
-150 mesh 27,569 $1,200 $33,083,000
Total 50,000 $1,525 $76,217,000

The sale price assumptions used in the PEA were based on the 24-month average graphite prices published by Industrial Minerals magazine (”IM”). Applying Mason’s product distribution to IM’s 24-month averages, the average selling price would become $1,974/tonne. In comparison to the industry’s market prices, the graphite prices used in the PEA are deemed by the Company to be conservative.

Luc Veilleux, CFO of Mason Graphite, commented, “The conservative price assumptions used in the PEA could represent a potential opportunity for improved economics. Integrating the 24-month average IM price of $1,974/tonne in the financial model could yield a potential improvement with a pre-tax NPV (8% discount) of $558M and an IRR of 44.7%.”

The commercial scenario used in the PEA considers realistic assumptions that are based on Mason Graphite’s established relationships with existing markets. Graphite is not an openly traded mineral, therefore prices are negotiated between end-users and producers in annual or multi-year contracts. The Company will continue to build close and continuous relationships with its potential customers in order to tailor the finished product to meet their exact needs. The Lac Guéret project does not rely on yet-to-come technologies and demands; however, it will be well positioned to work with new applications, technologies, markets and customers.

MINING

Highlights
Mining costs $36/tonne of finished product; $6/tonne mined
Average graphite grade 27.4% Cgr
Stripping ratio 0.76:1
Average graphite material mined per year 176,000 tonnes
Average waste mined per year 134,000 tonnes
Total material moved per year 310,000 tonnes

The Lac Guéret graphite deposit outcrops on surface, therefore mining will be carried out using conventional open pit mining. Due to the hard nature of the mineralization, drilling and blasting will be required. The high grade graphite in the mineralization and the low waste stripping ratio will result in a very low amount of total material movement. Throughout the life of the mine, only about 6 tonnes of material will have to be mined for the production of one tonne of finished graphite concentrate.

The processing plant and waste dump will be located less than 1,500 metres from the mine to ensure short cycle times and low production costs.

PROCESSING & RECOVERY

Proven process resulting in exceptionally high graphite recoveries above 96%

Highlights
Processing costs $221/tonne of finished product;
$63/tonne of material processed
Annual average processing rate 176,000 tonnes
Annual average production 50,000 tonnes of graphite concentrate
Average graphite recovery Above 96%
Finished product purity Up to 96.4% Cgr

The graphite recovery process at Lac Guéret consists of crushing, followed by multiple steps of grinding and flotation separation circuits. The processing plant is based on a flow sheet developed by SGS, using proven technologies to create a very efficient process resulting in remarkably high graphite recoveries. Lock cycle tests were performed by SGS and have demonstrated the robustness of the flow sheet.

Using standard product specifications of the industry, commercial distribution was calculated based on the mineral deposit’s metallurgical distribution. See the Company’s press release dated February 22, 2013 for further detail on the Lac Guéret metallurgical results.

The processing plant was designed to allow for capacity increases to satisfy the market demand.

Flake size distribution for annual production of 50,000 tonnes of concentrate

Flake Size Distribution (%) Tonnes of Product
+50 mesh 18.4% 9,200
+80 mesh 12.2% 6,095
+150 mesh 14.3% 7,136
-150 mesh 55.1% 27,569
Total 100.0% 50,000

Additional development work is planned with the goal of further optimizing the flake size distribution as well as the purity of the final concentrate. These tests will also be conducted on samples obtained from other areas of the mineral deposit.

CAPITAL & OPERATING COSTS

Low capital intensity and cash operating costs

Capital Cost Breakdown
Mining $8,026,000
Plant $55,264,000
Tailings and water management $4,271,000
Infrastructure and Services $17,074,000
Total direct costs $89,935,000
Contingency (20 % of direct costs) $17,987,000
$107,922,000
Indirect costs $21,768,000
Sustaining capital $6,281,000
Mine closure and rehabilitation $4,493,000

 

 

Cash Operating Cost Breakdown (per tonne of finished product)
Mining $36/tonne
Plant $221/tonne
Support & Infrastructure $133/tonne
Total $390/tonne

PROJECT LOCATION & INFRASTRUCTURE

Excellent accessibility in a stable and mining-friendly jurisdiction

The Lac Guéret property covers approximately 11,630 ha (116 km2) in northeastern Quebec, and is located about 300 km north of the main service centre of Baie-Comeau. The mine site is accessible from the main public highway, Hwy 389, via approximately 80 km of good quality logging roads throughout the property. The Company plans to build a mining and operations camp that will consist of accommodations for the personnel, offices and a fully equipped maintenance facility for the fleet of vehicles. Power for the project will be produced onsite using diesel generators.

The Technical Report will be posted on Mason Graphite’s website at www.masongraphite.com and on SEDAR at www.sedar.com, within 45 days following this news release.

Quality Control and Assurance

Mary-Jean Buchanan, Eng. M.Env., of Met-Chem Canada Inc. independent Qualified Person as defined by National Instrument 43-101, for the purposes of the PEA has reviewed the technical content of this press release. Jean L’Heureux, Eng., Senior Director of Process Development for Mason Graphite, and a Qualified Person for Mason Graphite has read and approved this press release.

About Mason Graphite

Mason Graphite is a Canadian mining company focused on the exploration and development of its 100% owned Lac Guéret graphite property, which is located in northeastern Québec near the main service center of Baie-Comeau. The Lac Guéret graphite property currently hosts a National Instrument 43-101 compliant Mineral Resource (see news release issued on July 16, 2012), which considers the exploration of only 17% of one well defined zone. Excellent potential exists for mineral growth. The Company’s senior management team possesses significant graphite expertise from their experience at Timcal/Imerys; including Benoit Gascon, CPA, CA, who held 20 years of executive positions, including over 6 years as President and CEO; Jean L’Heureux, Eng., Senior Director of Process Development, with over 20 years of experience; and Luc Veilleux, CPA, CA, with 8 years of experience. Timcal, now owned by Imerys, is one of the largest graphite producers in the world.

Cautionary Statements Regarding Forward Looking Information

This press release contains “forward-looking information” within the meaning of Canadian securities legislation. All information contained herein that is not clearly historical in nature may constitute forward-looking information. Generally, such forward-looking information can be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases or state that certain actions, events or results “may”, “could”, “would”, “might” or “will be taken”, “occur” or “be achieved”. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: (i) volatile stock price; (ii) the general global markets and economic conditions; (iii) the possibility of write-downs and impairments; (iv) the risk associated with exploration, development and operations of mineral deposits; (v) the risk associated with establishing title to mineral properties and assets; (vi) the risks associated with entering into joint ventures; (vii) fluctuations in commodity prices; (viii) the risks associated with uninsurable risks arising during the course of exploration, development and production; (ix) competition faced by the resulting issuer in securing experienced personnel and financing; * access to adequate infrastructure to support mining, processing, development and exploration activities; (xi) the risks associated with changes in the mining regulatory regime governing the resulting issuer; (xii) the risks associated with the various environmental regulations the resulting issuer is subject to; (xiii) risks related to regulatory and permitting delays; (xiv) risks related to potential conflicts of interest; (xv) the reliance on key personnel; (xvi) liquidity risks; (xvii) the risk of potential dilution through the issue of common shares; (xviii) the Company does not anticipate declaring dividends in the near term; (xix) the risk of litigation; and (xx) risk management.

Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made, including but not limited to, continued exploration activities, no material adverse change in metal prices, exploration and development plans proceeding in accordance with plans and such plans achieving their stated expected outcomes, receipt of required regulatory approvals, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking information. Such forward-looking information has been provided for the purpose of assisting investors in understanding the Company’s business, operations and exploration plans and may not be appropriate for other purposes. Accordingly, readers should not place undue reliance on forward-looking information. Forward-looking information is made as of the date of this press release, and the Company does not undertake to update such forward-looking information except in accordance with applicable securities laws.

 

 

 

 

Image with caption: “Figure 1 – GR Zone & GC Zone showing July 2012 mineral resource area (CNW Group/Mason Graphite Inc.)”. Image available at: http://photos.newswire.ca/images/download/20130422_C7293_PHOTO_EN_25822.jpg

Image with caption: “Figure 2 – Lac Guéret property location and infrastructure (CNW Group/Mason Graphite Inc.)”. Image available at: http://photos.newswire.ca/images/download/20130422_C7293_PHOTO_EN_25821.jpg

SOURCE: Mason Graphite Inc.
For further information:

For more information about Mason Graphite, visit www.masongraphite.com or contact:

Investor Relations
+1 (416) 861-1685
[email protected]

Simon Marcotte, Vice-President Corporate Development
+1 (416) 309-2133

Benoît Gascon, President & CEO
+1 (514) 289-3574

Montreal Office
2000 McGill College ave., Suite 2210
Montreal, QC H3A 3H3

Toronto Office
65 Queen Street West, Suite 800
Toronto, ON M5H 2M5

Focus Graphite Reports Commissioning and Start Up of Lac Knife Project Pilot Plant

Posted by AGORACOM-JC at 8:52 AM on Wednesday, April 17th, 2013

OTTAWA, ONTARIO–(April 17, 2013) – Focus Graphite Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) (“Focus” or the “Company”) is pleased to report the commissioning of its pilot plant and the start-up of circuit testing for the production of high-grade graphite concentrates from the Company’s wholly-owned Lac Knife, Québec graphite project.

The principal objectives of the pilot plant testwork are to confirm the results from Phase II bench scale Locked Cycle Tests (LCT)*; to assess the technical viability and operational performance of the processing plant design; to generate tailings for environmental testing, and; to produce a range of graphite raw materials for customer assessments and for further upgrading.

The Lac Knife project pilot plant was designed and built and is being operated by SGS Canada Inc. (“SGS”) in Lakefield, Ontario. The testing is expected to last 4-6 weeks.

Dr. Joseph Doninger, Focus Graphite’s Director of Manufacturing and Technology said the pilot plant tests are a critical component of the Lac Knife project development program.

“The testwork will provide us with the information we need to refine and optimize the design our mineral processing flow sheet and adjust individual circuits. They’ll also generate data needed for scale up of relevant processing equipment and to identify those critical controls required to maintain consistency of graphite concentrate recovery and purity.

“At the end of the day,” Dr. Doninger said, “the pilot plant campaign will provide us with the knowledge and the ability to adjust our processes to produce high purity graphite concentrates to fit individual customers’ needs and technical requirements.”

On March 4, 2013, the Company published its preliminary Phase II LCT* results which confirmed the high purity of the concentrates generated from four composite core samples comprised of low-grade and semi-massive graphite with a head grade ranging between 6.0% C and 20.7% C.

The highlights of those tests conducted by SGS confirmed:

  • The average amount of graphite flake recovered from the core samples in the Phase II LCT increased to 92.2% compared with a recovery of 84.7% graphite flake in the Phase I LCT;
  • The proportion of large flakes (+80 mesh) in the graphite concentrates ranged between 35% and 58%;
  • The carbon content of graphite concentrates produced from the four (4) composites averaged 96.6 %C, including the fine flake fraction (-200 mesh), a 4.6% increase over Phase I LCT completed in mid-2012.

Final results for Phase II LCT including for the two composite drill core samples of massive graphite mineralisation are pending.

* A locked cycle test is a repetitive batch flotation test conducted to assess flow sheet design. It is the preferred method for arriving at a metallurgical projection from laboratory testing. The final cycles of the test are designed to simulate a continuous, stable flotation circuit.

Lac Knife Pilot Plant Testing Program

The pilot plant was designed, built and is being operated by SGS Canada Inc. (“SGS”) in Lakefield, Ontario. The flow-sheet design for the pilot plant is based on the results of Phase II bench top LCT at SGS and on the findings of experimental test work conducted at Metchib Metallurgical Laboratories of Chibougamau, Québec. The pilot plant is designed to operate in continuous mode at a feed rate of 200 kg per hour and it includes grinding mills, mechanical flotation cells, magnetic separator, flotation columns, classification devices, dewatering and other ancillary equipment such as power generation, electrical components, internal piping, a water distribution system and flotation reagent distribution. The grinding and floatation components of the circuit have been configured specifically to minimize flake wear and breakage and ensure maximize flake size preservation.

Two bulk graphite composites were provided to SGS by the Company to use as feed material for the pilot plant. The first is a bulk 21.6t sample of weathered semi-massive grade graphite mineralisation collected from surface that will be used for mechanical and metallurgical commissioning of the pilot plant circuit. The second bulk composite sample was assembled from drill core and consists of a 23.3t blend of core samples from the massive, semi-massive and low-grade mineralisation zones from the deposit. Both composites were crushed and homogenized by SGS prior to the pilot plant campaign to ensure consistent feed. Once the pilot plant circuit is dialed-in using the surface bulk sample, the composite core sample will be introduced into the circuit. The results from the processing of the bulk drill core sample will be used to establish the processing plant flow-sheet design. Graphite flake samples produced from the pilot plant will be submitted to potential customers for quality evaluations and purification trials designed to generate final saleable products.

Testing at SGS is expected to last 4-6 weeks.

About Focus Graphite

Focus Graphite Inc. is an emerging mid-tier junior mining development company, a technology solutions supplier and a business innovator. Focus is the owner of the Lac Knife graphite deposit located in the Côte-Nord region of northeastern Québec. The Lac Knife project hosts a NI 43-101 compliant Measured and Indicated mineral resource of 4.972 Mt grading 15.7% carbon as crystalline graphite with an additional Inferred mineral resource of 3.000 Mt grading 15.6% crystalline graphite. Focus’ goal is to assume an industry leadership position by becoming a low-cost producer of technology-grade graphite. On October 29th, 2012 the Company released the results of a Preliminary Economic Analysis (“PEA”) of the Lac Knife project which demonstrates the project has excellent potential to become a producer of graphite. As a technology-oriented enterprise with a view to building long-term, sustainable shareholder value, Focus invests in the development of graphene applications and patents through Grafoid Inc.

About SGS Canada’s Metallurgical Services (Lakefield)

SGS Canada Inc. (“SGS”) is recognized as a world leader in the development of flow sheets and pilot plant programs. SGS’ Metallurgical Services division was founded over half a century ago. Its metallurgists, hydrometallurgists and chemical engineers are experienced in all the major physical and chemical separation processes utilized in the recovery of metals and minerals contained in resource properties around the world.

The technical information presented in this press release has been reviewed by Marc-André Bernier, M.Sc., P.Geo. (Québec and Ontario), Focus Director and a Qualified Person under NI 43-101.

Forward Looking Statements – Disclaimer

This news release may contain forward looking statements, being statements which are not historical facts, and discussions of future plans and objectives. There can be no assurance that such statements will prove accurate. Such statements are necessarily based upon a number of estimates and assumptions that are subject to numerous risks and uncertainties that could cause actual results and future events to differ materially from those anticipated or projected. Important factors that could cause actual results to differ materially from the Company’s expectations are in our documents filed from time to time with the TSX Venture Exchange and provincial securities regulators, most of which are available at www.sedar.com Focus Graphite disclaims any intention or obligation to revise or update such statements.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contact Information

 

Mr. Gary Economo
President and Chief Executive Officer
613-691-1091, ext. 101
[email protected]
www.focusgraphite.com

Lomiko Sends 94%-100.00%, High to Ultra Pure Carbon Flake Graphite Samples to Graphene Labs for Graphite to Graphene Testing

Posted by AGORACOM-JC at 1:43 PM on Tuesday, April 16th, 2013

VANCOUVER, BRITISH COLUMBIA and NEW YORK, NEW YORK–(April 16, 2013) – LOMIKO METALS INC. (TSX VENTURE:LMR)(PINKSHEETS:LMRMF)(FRANKFURT:DH8B) (Europe: ISIN: CA54163Q1028, WKN: A0Q9W7) (the “Company”) announces that it has prepared a variety of high to ultra pure carbon flake graphite samples for testing by Strategic Alliance Partner Graphene Laboratories Inc. (“Graphene Labs”), which has been involved in researching graphene and the development of graphene-related products.

Lomiko and Graphene Labs plan to co-develop a vertically integrated supply chain that includes a secure supply of high-quality graphite, cost-effective and scalable processing, tight quality control and integration of graphene-based products in end-user products. The parties will capitalize on the secure supply of high quality graphite, provided by Lomiko, and the extensive customer database and expertise in graphene materials brought by Graphene Labs.

Lomiko will provide mineral samples from the Quatre Milles Project required for testing natural high quality flake graphite for graphene conversion. The primary goal of testing is for Graphene Labs to develop a feasible procedure for the purification of flake graphite for use in graphene production. Graphene Labs will also provide guidance on technologies tailored to the production of graphene and graphene-related materials.

Further, Lomiko will continue to work towards securing financing to complete the acquisition of the Quatre Milles West Property.

Graphene Laboratories Inc. Background

Graphene Laboratories, Inc., located in Calverton, NY, specializes in the manufacture and sale of research materials to R&D markets, with the world’s largest selection of advanced and 2D materials. Having been first in the market to introduce graphene materials for research use, the company is working towards industrial-scale production of graphene and graphene-like materials, currently with pilot-scale production capabilities. The team at Graphene Laboratories are recognized experts in graphene materials, with staff regularly presenting at international conferences and exhibitions. Researchers at Graphene Labs also specialize in custom projects and R&D.

Graphene Laboratories Inc. operates both the Graphene Supermarket® (www.graphene-supermarket.com) and Maximum Materials™ (www.maximum-materials.com), and is a leading supplier of advanced 2D materials to thousands of customers around the globe. The company offers a wide variety of graphene materials, as well as other advanced 2D nanomaterials such as molybdenum disulfide, tungsten disulfide, and boron nitride products.

For more information on Graphene Laboratories, Inc, visit www.graphenelabs.com or contact them at (516)-382-8649 or via email at [email protected].

Lomiko Metals Inc Background

Lomiko Metals Inc. is a Canada-based, exploration-stage company. The Company is engaged in the acquisition, exploration and development of resource properties that contain minerals for the new green economy. Its mineral properties include the Quatre Milles Graphite Property and the Vines Lake property which both have had recent major discoveries. In April, 2012, a 122 Ha zinc anomaly in soils was found on the Company’s 100% owned Vines Lake property. The Vines Lake property is located in the south western corner of the Cassiar Gold District. The Vines Lake property consists of fifteen claims comprising 5,290 hectares. In October and November, 2012, Lomiko Metals Inc. announced 11 drill holes had intercepted several high grade intercepts of 9.81%, 10.11% and 10.80% over 3 to 5 metres in length 4.77 metres or less from the surface at the 3,780 Ha Quatre Milles Property indicating open pit potential. The project is located 175 km north of the Port of Montreal and 26 km from a major highway on a well-maintained gravel road.

On Behalf of the Board

A. Paul Gill, Chief Executive Officer

We seek safe harbor.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contact Information

 

Lomiko Metals Inc.
A. Paul Gill
604-729-5312
[email protected]
www.lomiko.com

Grafoid Inc. and the University of Waterloo Announce a JV Agreement to Develop High Performance Graphene Electrochemical Energy Systems

Posted by AGORACOM-JC at 10:28 AM on Tuesday, April 16th, 2013

OTTAWA, ONTARIO–(April 16, 2013) – Focus Graphite Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) on behalf of Grafoid Inc. (“Grafoid”) is pleased to announce the signing of a two-year R&D agreement between Grafoid Inc. and the University of Waterloo to investigate and develop a graphene-based composite for electrochemical energy storage for the automotive and/or portable electronics sectors.

Gary Economo, President and CEO of Focus Graphite Inc. and Grafoid Inc., said the objective of the agreement is to research and develop patentable applications using Grafoid’s unique investment which derives graphene from raw, graphite ore to target specialty high value graphene derivatives ranging from sulfur graphene to nanoporous graphene foam.

Some of the new graphene materials will contribute positively as a powerful next generation composite for fuel cell/electrochemical supercapacitor applications, he said.

Those applications include but are not limited to: electrodes, nanocatalyst support, electrolyte membranes and bipolar plates, transparent electrodes and other potential applications which create high-efficiency solutions in electrochemical energy systems and portable electronics.

“Today’s announcement marks Grafoid’s fifth publicly declared graphene development project with a major academic or corporate institution, and the third related directly to a next generation green technology or renewable energy development project,” Mr. Economo said.

It follows R&D partnering projects announced with Rutgers University’s AMIPP, CVD Equipment Corporation, with Hydro-Quebec’s research institute, IREQ, and with British Columbia-based CapTherm Systems, an advanced thermal management technologies developer and producer.

Mr. Economo said Grafoid’s investment in highly conductive graphene, combined with the University’s advanced catalyst technologies could advance the science “by opening the door to a realistic, cost-competitive option to other energy solutions.”

“Given our growth agenda for 2013, we expect to be in a position to announce a number of additional application development projects throughout the course of 2013,” Mr. Economo added.

Dr. Aiping Yu, Assistant Professor, Department of Chemical Engineering at the University of Waterloo will be the lead investigator of the project. Dr. Gordon Chiu, Research Scientist, Department of Chemical Engineering at the University of Waterloo will be working on the project.

Dr. Chiu said that research and discovery on graphene sulfur and nanoporous graphene is well documented and is a cornerstone for a wide range of applications

“The technology for tailoring graphene for energy storage systems must be developed. This will lead to unique intellectual property assets.

“Our group’s approach for targeting graphene derivatives that powerfully impact next generation energy storage systems adds significant value to commercial applications while providing invaluable knowledge and insight about the engineering of graphene and certain graphene metamaterials,” Dr. Chiu said.

Dr. Yu said that graphene without proper porosity and polarity remain “a constant roadblock for entry into next generation energy storage applications.

“My group will focus on solving the specific tailoring and design of graphene to enable entry into these energy storage areas” she said. ”

“Grafoid’s decision to invest in reducing or removing such a roadblock is a brilliant approach of enhancing graphene for impacting fuel cells, electrochemical supercapacitors and/or other portable energy storage systems,” Dr. Yu added.

Background

Alternative Energy & Graphene:

The quest for alternative energy sources is one of the most important and exciting challenges facing science and technology in the 21st century. Environmentally-friendly, efficient and sustainable energy generation and usage have become large efforts for advancing human societal needs. Graphene is a pure form of carbon with powerful characteristics which can bring about success in portable, stationary and transportation applications in high energy demanding areas in which electrochemical energy storage and conversion devices such as batteries, fuel cells and electrochemical supercapacitors are the necessary devices.

Electrochemical Supercapacitors:

Supercapacitors, a zero-emission energy storage system, have a number of high-impact characteristics, such as fast charging, long charge-discharge cycles and broad operating temperature ranges, currently used or heavily researched in hybrid or electrical vehicles, electronics, aircrafts, and smart grids for energy storage. The US Department of Energy has assigned the same importance to supercapacitors and batteries. There is much research looking at combining electrochemical supercapacitors with battery systems or fuel cells.

Fuel Cells:

A fuel cell is a zero-emission source of power, and the only byproduct of a fuel cell is water. Some fuel cells use natural gas or hydrocarbons as fuel, but even those produce far less emissions than conventional sources. As a result, fuel cells eliminate or at least vastly reduce the pollution and greenhouse gas emissions caused by burning fossil fuels, and since they are also quiet in operation, they also reduce noise pollution. Fuel cells are more efficient than combustion engines as they generate electricity electrochemically. Since they can produce electricity onsite, the waste heat produced can also be used for heating purposes. Small fuel cells are already replacing batteries in portable products.

Toyota is planning to launch fuel cell cars in 2015, and has licensed its fuel cell vehicle technology to Germany’s BMW AG. BMW will use the technology to build a prototype vehicle by 2015, with plans for a market release around 2020.

By 2020, market penetration could rise as high as 1.2 million fuel cell vehicles, which would represent 7.6% of the total U.S. automotive market. Other fuel cell end users are fork lift and mining industries which continuously add profits to this growing industry.

Proton or polymer exchange membranes (PEM) have become the dominant fuel cell technology in the automotive market.

The U.S. Department of Energy has set fuel cell performance standards for 2015. As of today, no technologies under development have been able to meet the DOE’s targets for performance and cost.

About Focus Graphite Inc.

Focus Graphite Inc. is an emerging mid-tier junior mining development company, a technology solutions supplier and a business innovator. Focus is the owner of the Lac Knife graphite deposit located in the Côte-Nord region of northeastern Québec. Focus’ goal is to assume an industry leadership position by becoming a low-cost producer of technology-grade graphite. As a technology-oriented enterprise with a view to building long-term, sustainable shareholder value, Focus Graphite is also investing in the development of graphene applications and patents through Grafoid Inc.

About Grafoid Inc.

Grafoid, Inc. is a privately held Canadian corporation investing in graphene applications and economically scalable production processes for pristine bilayer and trilayer graphene and its graphene derivatives from raw, unprocessed, graphite ore.

Focus Graphite, Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) holds a principal interest in Grafoid on behalf of its shareholders.

About the University of Waterloo

In just half a century, the University of Waterloo, located at the heart of Canada’s technology hub, has become one of Canada’s leading comprehensive universities with 35,000 full- and part-time students in undergraduate and graduate programs. Waterloo, as home to the world’s largest post-secondary co-operative education program, embraces its connections to the world and encourages enterprising partnerships in learning, research and discovery. In the next decade, the university is committed to building a better future for Canada and the world by championing innovation and collaboration to create solutions relevant to the needs of today and tomorrow. For more information about Waterloo, please visit www.uwaterloo.ca.

Contact Information

 

Gary Economo
President and CEO
Focus Graphite Inc.
613-691-1091 ext. 101
[email protected]
www.focusgraphite.com

Grafoid Inc. and CapTherm Systems Inc. Joint Venture to Develop Next-Generation Graphene Cooling Systems for EV and LED Applications

Posted by AGORACOM-JC at 12:23 PM on Tuesday, April 9th, 2013

OTTAWA, ONTARIO–(April 9, 2013) – Focus Graphite Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) on behalf of Grafoid Inc., announced today Grafoid’s joint venture development agreement with Coquitlam, British Columbia-based CapTherm Systems Inc. to develop and commercialize next generation, multiphase thermal management systems for electric vehicle (EV) battery and light emitting diode (LED) technologies.

CapTherm Systems Inc – Progressive Thermal Management is a thermal management/cooling company specializing in personal computer, server, LED, and electric vehicle cooling systems. It develops and commercializes proprietary, next-generation high-power electronics cooling technologies.

Its multiphase cooling technologies represent the core of its products that harness the power of latent heat from vaporization.

Under the terms of the agreement, Grafoid Inc., a company invested in the production of high-energy graphene and the development of graphene industrial applications will supply both materials and its science for adapting graphene to CapTherm’s existing EV and LED cooling systems.

“This alliance represents a milestone for both companies in their pursuit of cutting edge, energy-saving, green technology graphene applications,” said George Economo, Grafoid’s business development manager.

“Integrating graphene’s superior thermal conductivity to CapTherm’s existing EV and LED cooling applications goes to the core of Grafoid’s IP development strengths,” he said.

CapTherm Systems CEO & Technical Director Timo Minx said next generation cooling technologies require next generation materials.

“Graphene and its properties as a superconductor will enable CapTherm to position itself well for future thermal challenges,” Mr. Minx said.

“Making our products even more competitive by taking advantage of graphene’s lateral and vertical heat spreading capabilities is a logical step in advancing our science to meet those future challenges,” Mr. Minx added.

He said graphene is a novel 21st century material that has the potential to revolutionize a multitude of markets.

About Grafoid Inc.

Grafoid, Inc., is a privately owned graphene investment and graphene business development company establishing international standards for the production of economically scalable graphene.

Focus Graphite Inc. holds a major interest in Grafoid on behalf of its shareholders.

About CapTherm Systems Inc.

CapTherm specializes in the development and commercialization of proprietary next-generation high-power electronics cooling technologies. Solid state multiphase technology represents the core of CapTherm’s products and harnesses the raw power of latent heat of vaporization. The CT Fusion line of products is the only commercially available electronics cooling product in the market that takes advantage of a phase change (from liquid to vapor) in combination with a thermal pump to create a pumped cooling loop with no moving parts requiring no additional electric power offering increased reliability and performance over contemporary cooling systems. Our technology enables the creation of a broad range of industry applications that require smaller but higher performance, higher reliability and more energy efficient products – all at a lower cost.

About Focus Graphite Inc.

Focus Graphite Inc. is an emerging mid-tier junior mining development company, a technology solutions supplier and a business innovator. Focus is the owner of the Lac Knife graphite deposit located in the Côte-Nord region of northeastern Québec. Focus’ goal is to assume an industry leadership position by becoming a low-cost producer of technology-grade graphite. As a technology-oriented enterprise with a view to building long-term, sustainable shareholder value, Focus Graphite is also investing in the development of graphene applications and patents through Grafoid Inc.

Forward-Looking Statements – Disclaimer

This news release may contain forward-looking statements, being statements which are not historical facts, and discussions of future plans and objectives. There can be no assurance that such statements will prove accurate. Such statements are necessarily based upon a number of estimates and assumptions that are subject to numerous risks and uncertainties that could cause actual results and future events to differ materially from those anticipated or projected. Important factors that could cause actual results to differ materially from the Company’s expectations are in our documents filed from time to time with the TSX Venture Exchange and provincial securities regulators, most of which are available at www.sedar.com Focus Graphite disclaims any intention or obligation to revise or update such statements.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contact Information

 

Focus Graphite Inc.
Mr. Gary Economo
President and Chief Executive Officer
613-691-1091, ext. 101
[email protected]
www.focusgraphite.com

CapTherm Systems Inc.
Mr. Philipp Fuhrmann
Chief Operating Officer
778-284-7691 ext 102
[email protected]
www.captherm.com

Focus Graphite Releases Infill and Deposit Margin Drilling Results at Lac Knife Deposit : 42.8 m grading 20.43% Cgr in Hole LK-12-128

Posted by AGORACOM-JC at 11:25 AM on Tuesday, April 9th, 2013

OTTAWA, ONTARIO–(April 9, 2013) – Focus Graphite Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC) (“Focus” or the “Company”) is pleased to report the results of the summer 2012 infill and deposit margin drilling program on the Company’s 100%-owned Lac Knife graphite Property (the “Property”), located in the Grenville Geological Province of northeastern Québec. Fifty-six (56) large diameter (PQ-sized) core holes (total: 5,638 m) were drilled with the aim to upgrade the current Inferred mineral resources in the southeastern part of the Lac Knife deposit to the Indicated category; to map the limits of the deposit; and to provide sufficient mineralised feed material for phase II lock cycle metallurgical testing and for the pilot plant testing program currently scheduled to commence this month.

Hole LK-12-128 drilled on Line 500 S targeted the western zone of the deposit and returned one of the best graphitic carbon (Cgr) intersections of the program (Table 1):

Hole LK-12-128: 42.8 m grading 20.43% Cgr (from 60.7 to 103.5 m), including 11.8 m grading 36.08% Cgr (from 79.7 to 91.5 m)

Most of the drill holes intercepted significant graphite intersections* along the strike length of West, Central and East zones of the deposit as evidenced by the following Holes:

Hole LK-12-135 drilled on section 675 S: 60.5 m grading 17.88% Cgr (from 61.0 to 121.5 m), including 13 m grading 32.33% Cgr (from 70 to 83 m) and 11.8 m grading 26.39% Cgr (from 106.7 to 118.5 m)
Hole LK-12-147 drilled on section 375 S: 42.8 m grading 17.59% Cgr (from 12.4 to 55.2 m), including 5.4 m grading 39.56% Cgr (from 15.4 to 20.8 m)
* Significant intercepts are defined as Cgr > 5% over a minimum of 6 m; maximum internal dilution of 6 m; maximum external dilution of 0 m.

All 40 significant intercepts are summarized in Table 1. Sectional views of the drilling on lines 375 S, 500 S and 675 S are available on the Company’s website at www.focusgraphite.com).

Focus Graphite President and CEO Gary Economo states: “We are extremely pleased with the results of our infill resource drilling program at Lac Knife which continue to deliver high graphite grades over significant thicknesses in both the West and Central zones of the deposit. The 2012 drilling was primary designed to improve our current understanding of the limits, geometry, and continuity in thickness and grade of the graphite mineralisation, key elements required to upgrade our current mineral resource estimate and map additional resources. Our summer 2013 exploration program at Lac Knife will include additional resource drilling to consolidate the size and limits of the deposit”.

Table 1: Summary of significant graphitic carbon drill core intersections (Cgr > 5% and minimum intersection of 6 m) from the 2012 infill and deposit margin drilling program at the Lac Knife property.

Hole Azimuth Dip Total
Length
(m)
From
(m)
To
(m)
Core
Length**
(m)
Cgr***
(%)
S
(%)
LK-12-116 N078 -45 56 35.7 48.8 13.1 10.11 3.62
LK-12-117 N075 -50 135 64.5 79.5 15.0 7.08 3.18
LK-12-119 N081 -47 147 49.5 72.8 23.3 13.10 7.42
112.8 129.9 17.1 13.43 7.03
LK-12-120 N080 -47 138 54.7 68.2 13.5 12.60 5.30
114.5 126.7 12.2 10.45 5.47
LK-12-121 N081 -47 146 71.6 88.5 17.0 12.52 4.32
LK-12-123B N073 -47 171 23.3 41.8 18.5 15.84 5.18
LK-12-124 N089 -47 141 33.4 48.8 15.4 21.69 5.90
100.5 117.7 17.2 13.12 6.12
LK-12-125 N080 -47 159 6.9 18.0 11.2 17.93 5.22
24.2 31.4 7.2 15.62 4.22
84.0 102.5 18.5 12.63 7.81
LK-12-126 N078 -47 146 66.0 85.5 19.5 9.09 7.52
LK-12-127 N062 -69 131 16.6 33.1 16.5 19.08 4.98
90.2 112.3 22.1 12.19 6.29
LK-12-128 N075 -52 125 60.7 103.5 42.8 20.43 5.25
LK-12-129 N051 -47 111 75.0 93.0 18.0 20.97 6.72
LK-12-130 N059 -45 156 31.5 43.4 11.9 20.48 6.17
61.5 72.0 10.5 21.19 6.92
117.2 153.2 36.1 12.98 5.39
LK-12-131 N099 -48 215 22.6 92.3 69.7 15.81 5.44
112.0 130.8 18.8 12.04 4.45
147.6 214.5 66.9 17.89 9.46
LK-12-131-B N099 -48 59 17.8 58.5 40.7 12.37 4.03
LK-12-132 N073 -46 116 60.7 74.1 13.4 16.25 5.12
80.2 108.3 28.1 20.20 7.12
LK-12-133 N090 -65 101 32.5 58.3 25.8 13.73 4.56
68.2 92.0 23.8 18.19 5.96
LK-12-134 N065 -46 118 36.3 87.0 50.7 18.53 5.13
LK-12-135 N087 -53 125 61.0 121.5 60.5 17.88 5.40
LK-12-141 N076 -45 77 38.7 73.8 35.1 13.98 3.61
LK-12-142 N080 -45 75 0.0 13.5 13.5 10.62 2.88
26.0 41.2 15.2 20.28 4.13
LK-12-143 N079 -47 120 11.0 25.0 14.0 17.09 3.80
84.8 92.1 7.3 17.05 6.50
LK-12-144 N080 -45 96 27.6 92.2 64.6 17.70 7.96
LK-12-145 N104 -49 90 59.4 74.0 14.6 18.16 6.50
LK-12-146 N077 -45 81 44.3 61.9 17.6 16.84 8.20
LK-12-147 N085 -45 60 12.4 55.2 42.8 17.59 8.50
LK-12-149 N084 -55 108 67.1 78.9 11.8 14.11 3.86
LK-12-150 N078 -45 89 46.5 59.2 12.7 18.94 3.43
LK-12-153 N074 -45 78 19.0 40.2 21.2 13.17 3.07
52.1 72.0 19.9 17.05 8.05
LK-12-154 N077 -45 59 21.1 28.6 7.5 17.26 7.88
LK-12-156 N077 -45 90 9.8 18.2 8.4 19.85 3.96
56.0 70.2 14.2 19.51 7.80
LK-12-157 N077 -45 81 26.3 36.5 10.2 11.22 3.16
54.8 67.4 12.6 19.73 7.14
LK-12-158 N075 -45 41 17.5 34.0 16.5 17.79 7.38
LK-12-159 N036 -45 44 23.6 39.9 16.3 16.38 8.40
LK-12-160 N259 -50 110 10.5 109.5 99.0 26.21 6.81
LK-12-161 N098 -64 131 37.6 60.9 23.3 15.86 5.88
80.9 88.9 8.0 12.69 7.47
LK-12-162 N076 -45 92 7.5 49.0 41.5 14.23 5.20
63.7 72.0 8.3 8.07 3.91
LK-12-163 N081 -50 156 7.6 24.8 17.2 18.49 6.45
49.5 63.8 14.3 13.48 4.81
82.8 115.5 32.7 11.09 4.86
123.3 140.6 17.3 11.89 9.05
LK-12-164 N059 -45 182 2.0 21.6 19.6 9.50 2.98
74.5 88.5 14.0 16.06 6.79
114.9 124.5 9.6 15.96 8.54
164.4 181.5 17.1 10.85 4.08
LK-12-165 N077 -45 131 29.5 55.5 26.0 9.46 3.43
108.0 122.6 14.6 5.74 3.06
** Significant Cgr intersections are expressed as core length because the host rocks are highly metamorphosed and locally migmatized and folded. However, the mineralization envelope interpreted from the historical data cross-cuts the drill holes at a high angle.
*** All core sample carbon analyses performed by COREM and delivered as graphitic carbon (Cgr), internal analytical code LSA-M-B10, LECO high frequency combustion method with infrared measurement.

The mineralization at Lac Knife is hosted in biotite-quartz-feldspar paragneiss and schist of the Nault Formation, in association with iron formations of the Wabush Formation. These are equivalent to the lower Proterozoic Labrador Trough rocks affected by the late Proterozoic Grenvillian orogeny. Metamorphism associated with the Grenvillian orogeny has resulted in the formation of economic grade concentrations of graphite dominated by value-enhanced large flakes.

The Lac Knife property comprises 57 map-designated claims covering 2,986.31 ha located in Esmanville Township (NTS map sheet 23B/11), 27 km south-southwest of the iron-mining town of Fermont, in the Côte-Nord administrative district of Québec. Focus acquired a 100% interest in the property in October 2010. Maps showing the location of the Lac Knife property as well as drill holes locations are available on the company’s website at www.focusgraphite.com.

2012 Infill and Deposit Margin Drill Program, Methodology and QA/QC

The summer 2012 infill and deposit margin drilling program at Lac Knife comprised 56 large diameter (PQ-sized, 4-inch) core holes for a total of 5,628 m. The drilling program was designed to map the limits of the Lac Knife graphite deposit and provide sufficient additional data and control on mineralisation to be useful for in a new resource estimate. The drilling was also designed to provide enough mineralised material for phase II metallurgical testing (see Focus’ press release dated March 4th) and for subsequent pilot plant trials.

The 2012 drilling campaign was managed by IOS Services Geoscientifiques (“IOS”) of Chicoutimi, Québec. The infill and deposit margin drilling program started on July 1st and ended on September 17th 2012. The drilling was performed by G4 Drilling of Val-d’Or, Québec under the supervision of IOS.

The 56 holes were spread over the western, central and eastern zones of the deposit (see drill holes location map available on the Company’s website at www.focusgraphite.com).

Two slabs of about 1/4 of the 4 inch diameter PQ core were sawed parallel on each side of the central axis of the core. One of the slabs was earmarked for geochemical analysis while the other slab was kept as a witness sample. Center parts of the core were used as graphite-bearing material for the phase II metallurgical testing and for the subsequent pilot plant testing program.

A total of 2,076 sub-sample slabs of the PQ drill core were collected from all 56 holes and shipped to IOS for sample preparation (crushing and grinding). Once prepared, the samples were sent to the Consortium de Recherche Appliquée en Traitement et Transformation des Substances Minérales (“COREM”), an ISO/IEC 17025:2005 certified facility in Québec-City, for graphitic carbon (Cgr) analysis using LECO high frequency combustion method with infrared measurement (internal analytical code LSA-M-B10 for graphitic carbon; ISO 9686:2004). For the measurement of graphitic carbon, the sample is pre-treated with nitric acid, placed in a LECO capsule and introduced in the furnace (1,380ºC) in an oxygen atmosphere. Carbon is oxidized to CO2. After the removal of moisture, gas (CO2) is measured by an infrared detector and a computerized system calculates the concentration of graphitic carbon (Cgr). Total sulphur was also analyzed by LECO (code LSA-M-B41) (Table 1). For sulphur determinations, the sample is placed in a LECO capsule and introduced in the furnace (1,380ºC) until sulphur is oxidized to SO2. After the removal of moisture, gas (SO2) is measured by an infrared detector and a computerized system calculates the concentration of total sulphur (%).

Under the QA/QC program, about 10% of the samples were analyzed by COREM for total (code LSA-M-B45), organic (code LSA-M-B58), inorganic (code LSA-M-B11) and graphitic (code LSA-M-B10) carbon as well as for total sulphur (a total of 191 core samples). Duplicates of the same 191 samples were also sent to ACTLABS Laboratories of Ancaster, Ontario (ISO/IEC 17025:2005 with CAN-P-1579) for graphitic carbon (code 5D – C Graphitic) and total sulphur (code 4F – S Combustion infrared detection) determinations and for 35 multi-element analysis using ICP methods (code 1E2 – Aqua Regia). IOS introduced 181 standards, 173 duplicates and 159 blank samples into the batch of core sample as part of the QA/QC program.

Summer 2013 Drilling Program

Focus is currently working on the design of a two-phase follow-up drilling program on the Lac Knife property for the summer of 2013. Phase I of this program will include additional infill drilling within the limits of the deposit defined by the NI 43-101 compliant mineral resource estimate (see Lac Knife PEA Technical Report available on Focus’ website or at www.sedar.com). Phase II will consist of an exploration drilling program in order to test geophysical anomalies identified during last fall’s ground magnetic and horizontal loop electromagnetic (HLEM) survey done by G.L. Géoservice Inc. and interpreted by Geophysique Camille St-Hilaire Inc., both located in Rouyn-Noranda.

About Focus Graphite

Focus Graphite Inc. is an emerging mid-tier junior mining development company, a technology solutions supplier and a business innovator. Focus is the owner of the Lac Knife graphite deposit located in the Côte-Nord region of northeastern Québec. The Lac Knife project hosts a NI 43-101 compliant Measured and Indicated mineral resource of 4.972 Mt grading 15.7% carbon as crystalline graphite with an additional Inferred mineral resource of 3.000 Mt grading 15.6% crystalline graphite. Focus’ goal is to assume an industry leadership position by becoming a low-cost producer of technology-grade graphite. On October 29th, 2012 the Company released the results of a Preliminary Economic Analysis (“PEA”) of the Lac Knife project which demonstrates that the project has an excellent potential to become a producer of graphite. As a technology-oriented enterprise with a view to building long-term, sustainable shareholder value, Focus invests in the development of graphene applications and patents through Grafoid Inc.

The technical information presented in this press release has been reviewed by Benoit Lafrance, Ph.D., géo (Québec), Focus Vice-President of Exploration and a Qualified Person under NI 43-101.

Forward Looking Statements – Disclaimer

This news release may contain forward looking statements, being statements which are not historical facts, and discussions of future plans and objectives. There can be no assurance that such statements will prove accurate. Such statements are necessarily based upon a number of estimates and assumptions that are subject to numerous risks and uncertainties that could cause actual results and future events to differ materially from those anticipated or projected. Important factors that could cause actual results to differ materially from the Company’s expectations are in our documents filed from time to time with the TSX Venture Exchange and provincial securities regulators, most of which are available at www.sedar.com Focus Graphite disclaims any intention or obligation to revise or update such statements.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contact Information

Energizer Resources on pace to meet world graphite demand with full feasibility study at Molo project targeted for Q4

Posted by AGORACOM-JC at 3:37 PM on Monday, April 8th, 2013

Tuesday, April 09, 2013 by Carrie White

Given its robust PEA at its Molo graphite project in Madagascar, as well as the quality of the project and the speed at which it has advanced, it appears that Energizer Resources is well positioned to realize production by Q4 2015.Given its robust PEA at its Molo graphite project in Madagascar, as well as the quality of the project and the speed at which it has advanced, it appears that Energizer Resources is well positioned to realize production by Q4 2015.

 

With the graphite market forecast to ramp up significantly in the near future, Energizer Resources (TSE:EGZ) (OTCBB:ENZR) says it will be ready to meet the demand.

The company not only has a giant resource in its Molo graphite deposit in Madagascar, but it is moving toward a full-feasibility study at a rapid pace, having recently released “a very conservative” yet strong preliminary economic assessment (PEA) – one of only three junior graphite companies to have done so.

Energizer late last year unveiled an NI 43-101 resource estimate for Molo, which ranks the deposit as one of the largest in the world.

Indicated resources at the Molo deposit total 83.99 million tonnes, grading 6.36 per cent carbon (C), above a 2 per cent C cut-off grade, with inferred resources totalling 40.32 million tonnes grading 6.3 per cent C.

Based on drill and trench data received to date, as well as mapping, prospecting, and geophysical surveying, graphite mineralization is confirmed at surface and over an area of at least 250,000 square metres.  Drilling has also confirmed that the mineralization is exposed at surface and open at depth in excess of 300 metres.

The conventional open pit project is expected to mine 1.17 million tonnes per year of ore, at an average head grade of 8.5 per cent with a stripping ratio of 1.65.

Brent Nykoliation, Energizer’s senior VP of corporate development, tells Proactiveinvestors that the company is targeting the completion of a bankable feasibility study and emphasizes that the Molo project can meet the current demand for graphite from the traditional steel markets and easily scale up when new demand for graphite in the energy markets heats up – as he believes it will be in the near future.

“In just 15 months from initial discovery, the team at Energizer in conjunction with its EPCM partner, DRA Mineral Projects of South Africa, has released a robust PEA study,” he says.

“Unlike other graphite companies who have released either a PEA Study or full feasibility study, Energizer’s PEA results included transportation costs FOB port as opposed to just ex-mine.”

The economics of the report, done by DRA Mineral Projects showed a post-tax net present value of $341.8 million on a 10 per cent discounted basis, with a 41 per cent IRR and a payback period of three years. Pre tax, the net present value was calculated at $421.5 million, with an IRR of 48 per cent.

According to the preliminary report, the average specification of the graphite to be produced is 92 per cent carbon (C), with average mill recovery estimated at 89 per cent. Nykoliation says that the PEA uses a conservative, average price of $1,564 per tonne of graphite, and did not include pricing for any large and jumbo flake.

Pricing for the full distribution suite of flaked graphite will be incorporated into the full feasibility study, slated to be initiated next quarter. Work on the full feasibility study will include construction of two pilot plants, each at a different accredited lab, to produce the necessary quantity of samples for presentation to potential off-take partners.

The work will also look to optimize flake size distribution and further upgrade its concentrates from purities between 98 and 98.6 per cent graphitic carbon to battery-grade target purity levels of greater than 99 per cent.

With completion of the full feasibility study targeted for the fourth quarter of this year, the start of mine construction is expected in the third quarter of 2014, and production is anticipated in the fourth quarter of 2015 at an output capacity of 84,000 tonnes per annum (tpa).

Along with its large, expandable NI 43-101 compliant resource that is able to meet market demand as required with a “full suite” of flake sizes, the company says it will be able to supply products to all market segments.

Energizer says it is also currently in off-take discussions with key graphite producers and manufacturers as well as with “leading financial institutions” for moving the project through to construction and production.

“The graphite market is very complicated, so we have spoken with many groups internationally on how to go forward in a partnership basis to place the graphite in customer’s hands,” says president, director and COO Craig Scherba.

Also key to the company’s future success is the unique location of its Molo deposit, which is in a sparsely populated, dry savannah grassland area. The environmental impact is therefore low, with the property having easy access through a network of secondary roads that lead to both the regional capital and port city of Toliara, and to the port of Soalara.

Scherba says other projects in Madagascar have paved the way in terms of mining laws, making it easier for companies like Energizer to move forward with their projects.

The company is also confident that operating costs will decline in the future as many other projects – particularly coal – are starting up in the region.

The nearby Sakoa Coal Field, just 30 kilometres away, will upgrade the now serviceable infrastructure, and with targeted production of 5 million tonnes of coal on an annualized basis, Energizer says the coal project will require significant upgrades to road infrastructure, port infrastructure, and on-site power plants – into which Energizer can no doubt tap. The Sakoa Coal Field is targeting operation between 2015 and 2016.

“We have diesel power generation in our OPEX costs right now, but should be able purchase ‘over-the-fence’ power once the Sakoa plant is built,” says Scherba.

“That means our operating costs will become even more favourable going into the future.”

The location of the company’s asset in Madagascar is also at the centre of the key graphite demand markets of China, India, South Korea and Japan – an important advantage for the Project

“Molo is located at the hub of high-volume world graphite markets and it is an easy process to ship from where we are located,” Scherba says.

The company also boasts favourable partnerships, with DRA Mineral Projects on board to help it construct its mine.

“DRA and its wholly owned division, Minopex, is one of the largest and most African-centric companies specializing in mine engineering, construction, and mine operation,” says Nykoliation.

Energizer has also enlisted the help of Panalpina, an intercontinental air and ocean freight supply chain and logistics companies, which has “hands-on experience” in Madagascar.

“They, in fact, handled all the logistics for the recently completed $6.5-billion Sherritt Ambatovy nickel mine, and they have confirmed that the current infrastructure in place is suitable today to support our graphite mine,” he adds.

Importantly, Scherba says the company also plans to apply for Madagascar’s Large Mining Investment Act (LGIM) permit, which defines the framework for developing and operating large-scale mining projects in the country, and provides for legal stability and financial incentives – including a tax exemption.

“The benefits of the LGIM permit are very positive for the company as it provides exemption for tax collection for first five years of a project (within guidelines), or until the mine turns a profit.” he notes.

“Based on a three year payback, that means we wouldn’t have to pay taxes in the first three years of operations.”

Graphite has achieved critical mineral status, with over 180 applications today that are dependent on the material.

China is currently the world’s largest producer of graphite, at about 80 per cent, but Energizer points out that the product is mostly lower grade.

“China, is realizing increased costs and reduced capacity due to older and deeper mines, and recent environmental and safety mandates will see significant mine rationalization – about 210 mines into just 20 super mines planned for this decade,” says Nykoliation.

“Just in the province of Hunan, they will be shutting 20 mines in the next three to four years due to environmental concerns.”

As the demand for graphite grows, the steel industry is still expected to be the number one consumer of the product, with automotive being the next highest consumer as advancements in the electric engine continue to improve.

Nykoliation explains that the estimated demand within the auto industry of one million electric vehicles would require the equivalent of at least five Molo deposits.

Even if electric vehicles are slow to take off, he notes that graphite has multiple layers of demand. There are many other new demand channels which will require graphite in the future, including large-scale lithium ion and vanadium redox batteries for grid storage, pebble bed nuclear reactors, consumer electronics, and fuel cells.

Meanwhile, the graphene market is expected to skyrocket through 2020.

Graphene, hailed as “the wonder product of graphite” is a two-dimensional crystal of pure carbon, is the thinnest and strongest substance known to science – about 300 times stronger than steel by weight.

It is a much better conductor of electricity than copper, is stretchable, almost transparent and also conducts heat better than any other known substance. Graphene-based applications with the greatest anticipated demand include consumer electronics, communications, computing devices, industrial materials, military/security and biotech.

According to a report recently released by BCC Research, new figures from global technology strategy and consultancy company CambridgeIP indicate there is a global graphene patent race underway to exploit graphene-based applications.

A global survey shows there are currently a total of 7,351 patents filed for applications of graphene, with just 3 countries holding 68% of them.  China leads the world with 2,204, followed closely by the U.S. with 1,704 and South Korea with 1,160.  Samsung leads all companies with patents, followed by Xerox.

As well, the level of investment going toward moving graphene from the laboratory to the marketplace is unprecedented. Europe has pledged €1 billion towards graphene research, while University of Cambridge and Manchester have both committed to building graphene research facilitates totalling over €85 million.

“We have the ability at Molo to meet traditional current as well as burgeoning markets coming on board,” Nykoliation says. “Even if one or two take off, there will be a need for a lot of graphite.”

With all that in mind, Nykoliation says the company remains focused on moving the development of the Molo forward.

According to US-based research firm House Mountain Partners, in January 2012 there were nine junior exploration companies involved in graphite exploration on the TSX, TSX-Venture, ASX and the AIM Exchanges. Today, there are over 82 companies managing 150 graphite projects in 13 countries. Of those 82 companies, only 12 have delineated a NI-43101 or JORC compliant resource, only three have completed a preliminary economic assessment study (Energizer is one of them) and only one has a final feasibility study.

As a result, several industry analysts, notably Chris Berry and Mickey Fulp, share the view that within the graphite space, there are “many pretenders and very few contenders” – only a select few will realize production.

Given the quality of the Molo project and the speed in which it has advanced, it appears that Energizer Resources is well positioned to be one of these companies.

Source: http://www.proactiveinvestors.com.au/companies/news/41750/energizer-resources-on-pace-to-meet-world-graphite-demand-with-full-feasibility-study-at-molo-project-targeted-for-q4-41750.html

WATCH: Season 2, Episode 5 of The Next Biggest Winner – Big North Graphite and Canada Strategic Metals

Posted by AGORACOM-JC at 11:22 AM on Monday, April 8th, 2013

On this week’s episode Spiro Kletas, President and CEO of Big North Graphite, as well as, Chad McMillan, Director of Canada Strategic Metals, provide viewers with valuable and interesting information pertaining to both their companies and the fast rising small-cap graphite industry.

SEGMENT 1 – Matt Gowing, research analyst with Mackie Research provides a compelling argument for the future of the graphite market.

SPECIAL FEATURE: Anthony Giovinazzo of Cynapsus Therapeutics then takes the stage to discuss the company’s development of a  non-injectable delivery of the only approved drug to be used as a rescue therapy for “off” motor symptoms of Parkinson’s disease as well as their recent financing and a grant from the Michael J. Fox Foundation.

SEGMENT 2 – Spiro Kletas, President and CEO of Big North Graphite discusses the company’s interest in the past producing Nuevo San Pedro project which is an amorphous graphite mine located in Mexico, in a region that has produced graphite for more than 100 years.

Chad McMillan of Canada Strategic Metals then takes the stage to discuss the company’s metallurgical characterization results from a recent work program on the La Loutre graphite property.

SEGMENT 3 – Round Up! Matt Gowing rejoins the guests to discuss the amorphous vs. flake graphite market.

 

 

WATCH: “The Next Biggest Winner” (Episode #5) Sneak Peek: Big North Graphite and Canada Strategic Metals

Posted by AGORACOM-JC at 3:36 PM on Friday, April 5th, 2013

The Next Biggest Winner, a leading and nationally televised investment show focusing on small-cap and mid-cap companies, is pleased to announce Episode 5 will be airing across Canada this weekend.

EPISODE 5 GUESTS

Big North Graphite (TSX VENTURE:NRT)

Canada Strategic Metals (TSX VENTURE:CJC)(OTCQX:CJCFF)(FRANKFURT:YXEN)

Spiro Kletas, President and CEO of Big North Graphite, as well as, Chad McMillan, Director of Canada Strategic Metals, provide viewers with valuable and interesting information pertaining to both their companies and the fast rising small-cap graphite industry.

Gary Economo, President and CEO of Focus Graphite was unable to make the show due to illness but will be appearing in a future episode.

TELEVISION BROADCAST DETAILS

The show airs nationally on television via iChannel in prime time as follows:
WHEN: Saturday April 6th 7:30 PM EST (Also 8:30 AM & 3:30 AM)
Sunday April 7th 6:30PM EST (Also 7:30 AM & 2:30 AM)

WHERE: iChannel (See listing below or check iChannel for your local area)

Bell Channel 514 Across Canada

Cogeco Channel 136 in Ontario and Quebec

MTS TV Channel 282 in Manitoba

Rogers Channel 197 in Ontario, Quebec, Nova Scotia, New Brunswick

Shaw Cable Channel 110 in BC / Channel 95 Everywhere Else

Shaw Direct Channel 593 (Classic) Channel 222 (Direct)

Source Cable Channel 174 Ontario

Telus TV Not Available Yet

Videotron Channel 146 in Quebec

About The Next Biggest Winner

The Next Biggest Winner is a television interview series for Canadian investors dedicated to identifying companies poised for growth. If your company believes it is The Next Biggest Winner and would like to appear on the show, please contact us below.

To watch a sneak peek of this episode, as well as, previous full episodes click here.