Agoracom Blog Home

Author Archive

$GGX.ca GGX Gold Drilling Intersects 6.16 g/t Gold & 72.4 g/t Silver Over 3.41m at COD Vein, Gold Drop Property, Southern British Columbia $NNA.ca $K.ca

Posted by AGORACOM at 9:57 AM on Wednesday, August 1st, 2018

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png

  • Assays received for 2018 drill holes COD18-34 to COD18-36 which tested the COD Vein, Gold Drop Southwest Zone.
  •  COD18-34 returned 6.16 grams per tonne (g/t) gold, 72.4 g/t silver and 31.0 g/t tellurium over 3.41 meter
  • COD18-34 is located 180 meters southwest of hole COD17-14 which intersected 4.59 g/t gold over 16.03m, including 10.96 g/t gold over 5.97m

Vancouver, British Columbia (FSCwire)GGX Gold Corp. (TSX-v: GGX), (OTCQB: GGXXF), (FRA: 3SR2) (the “Company” or “GGX”) is pleased to announce the receipt of the additional analytical results from its diamond drilling program on the Gold Drop property, located near Greenwood, B.C. Drill core analytical results have been received for 2018 drill holes COD18-34 to COD18-36 which tested the COD Vein. The COD gold bearing vein is located in the Gold Drop Southwest Zone.

To view the graphic in its original size, please click here

A highlight from these analytical results is an intersection of 6.16 grams per tonne (g/t) gold, 72.4 g/t silver and 31.0 g/t tellurium over 3.41 meter core length in hole COD18-34. This gold-bearing interval (quartz veins and altered granodiorite) in hole COD18-34 is located at approximately 25 meter vertical depth and approximately 115 meters southwest of the area of 2017 trenching.  COD18-34 is located approximately 180 meters southwest of hole COD17-14 which intersected the 4.59 g/t gold over 16.03 meters, including 10.96 g/t gold over 5.97 meters (News Release of September 7, 2017).

The analytical results listed below are highlights from drill holes COD18-34 to COD18-36 (intersections greater than 1 g/t gold), testing the continuation of the COD Vein south-southwest of the 2017 trench. Since true widths cannot be accurately determined from the information available the core lengths (meters) are reported. The gold, silver and tellurium analyses are reported in grams per tonne (g/t). The intervals listed in following table are from the gold, silver and tellurium bearing quartz vein and / or adjacent altered granodiorite.

Hole ID From (m) To (m) Interval Length (m) Au (g/t) Ag (g/t) Te (g/t)
COD18-34 35.59 39.00 3.41 6.16 72.4 31.0
including 35.59 35.93 0.34 18.85 104 80.1
including 37.60 38.41 0.81 14.85 244 82.8
including 38.41 39.00 0.59 2.91 13 10.65
COD18-34 40.00 40.45 0.45 2.36 17 15.7
COD18-35 53.65 54.25 0.60 1.62 17.05 11.85
COD18-35 55.00 55.74 0.74 1.58 13.95 11.15
COD18-36 41.20 43.00 1.80 1.61 14.28 8.62
Previous drill core analytical results from the 2018 drilling program are reported in News Releases of May 29, June 14, June 27, July 11, July 19 and July 25. The highlight of the 2018 drilling program to date is 14.62 g/t gold, 150.2 g/t silver and 102.0 g/t tellurium over 2.1 meter core length in hole COD18-3 at the COD Vein.

The 2018 drilling program to date has been mainly focused on testing and defining the COD Vein, a Dentonia/Jewel style quartz vein. Trenching during 2017 exposed the northeast – southwest striking COD Vein for over 160 meter strike length. The 2018 drilling program has also tested the continuation of the Everest Vein, which is located approximately 600 meters southwest of the COD Vein worksite. The Everest Vein was first discovered by Company prospectors during the 2017. Chip samples collected in 2017 across the approximate 0.4 meter wide vein exposure returned up to 52.8 g/t gold and 377 g/t silver while a grab sample of a quartz vein boulder broken off the outcrop by the excavator returned 81.8 g/t gold and 630 g/t silver (News Release of August 21, 2017).

Drill core from the 2018 program was geologically logged and sampled. Drill core was sawn in half with half core samples submitted for analysis and remaining half core stored in a secure location. Core samples were delivered to the ALS Minerals laboratory in Vancouver to be analyzed for gold by Fire Assay – AA. The samples were also analyzed for 48 Elements by Four Acid and ICP-AES / ICP-MS. Quality control (QC) samples were inserted at regular intervals.

To view the graphic in its original size, please click here

The Company also announces it has granted 1,000,000 options at an exercise price of $0.15. The options are exercisable for five years and will be cancelled 30 days after cessation of acting as a director, officer, employee or consultant of the Company.

David Martin, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

To view the Original News release with pictures please go to the website or contact the company.

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

[email protected]

Investor Relations:               

Mr. Jack Singh, 604-488-3900  

[email protected]

“ We don’t have to do this, we get to do this ”  The Crew 

 

To view the graphic in its original size, please click here

FEATURE: Applied Biosciences – Poised to Succeed in CBD Market $AERO $CBDS $CGRW $APH.ca $GBLX

Posted by AGORACOM at 12:43 PM on Tuesday, July 31st, 2018

        

  • Consumer company with Multiple CBD Brands focused on Consumer, Pet, Female and Health and Wellness
  • Building brand with a scalable process and operation
  • Commenced sales of its hemp-derived CBD products on LeafLink’s industry-leading B2B e-commerce platform
  • Launched CBD product line under the Remedi CBD brand
  • Products will be sold on Remedi’s new website (www.remedishop.com) and in select locations in the U.S.
  • Launched CBD product line under TherPet brand (https://therpet.com/)
  • Currently shipping to the majority of US states and Internationally to 5 countries
  • Several strategic partnerships and investments currently in place
  • Partners include: High Times & GemmaCert

Key Market Drivers

     Increasing Momentum Towards Legalization

  • Especially related to medical -use Cannabis
  • Cannabis is legal in 29 states and the District of Columbia in some form ( or decriminalized )
  • International Opportunities: * Cannabis is now trading globally, with Canadian grown Medical cannabis being exported to Germany, Croatia, New Zealand, Brazil and Chile. The Dutch are sending shipments of medical cannabis to Italy, Germany and Finland.   

     Shifting Public Opinion

  • Belief that the growth of the regulated cannabis industry has been fueled by changing public attitudes in the United States. A 2015 poll by Harris found 81% of Americans support the legalization of cannabis for medical use. Driven in part by this shift in public opinion.       

                        

About Applied BioSciences Corp.

Applied BioSciences Corp. (www.appliedbiocorp.com), is a diversified company focused on multiple areas of the medical, bioceutical and pet health industry. As a leading company in the CBD and Pet health space, the company is currently shipping to the majority of US states as well as to 5 International countries. The company is focused on select investment, consumer brands, and partnership opportunities in the recreational, health and wellness, nutraceutical, and media industries.

The company has several strategic partnerships and investments currently in place and is actively pursuing additional partnerships and strategic growth opportunities.

Contact

Email: [email protected] or [email protected]

To be added to the Applied BioSciences email distribution list, please email [email protected] with APPB in the subject line.

Official Website: www.appliedbiocorp.com

Brands:

www.remedishop.com
www.therpet.com

Follow us:

Facebook @remedicbd & @therpetcbd
Instagram @remedicbd & @therpet
Twitter @remedishop & @therpet

GGX Gold Diamond Drilling Intersects – 8.65 g/t Gold & 47.6 g/t Silver Over – 2.98 Meters  at COD Vein $GGX.ca $K.ca

Posted by AGORACOM at 9:16 AM on Wednesday, July 25th, 2018

 

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png
  • Holes COD18-31 to COD18-33 which tested the COD Vein on GoldDrop Property
  • 8.65 grams per tonne (g/t) gold, 47.6 g/t silver and 37.3 g/t tellurium over 2.98m

GGX Gold Corp. (TSX-v: GGX), (OTCQB: GGXXF), (FRA: 3SR2)(the “Company” or “GGX”) is pleased to announce the receipt of the additional analytical results from its diamond drilling program on the Gold Drop property, located near Greenwood, B.C. Drill core analytical results have been received for 2018 drill holes COD18-31 to COD18-33 which tested the COD Vein. The COD gold bearing vein is located in the Gold Drop Southwest Zone.

To view the graphic in its original size, please click here

A highlight from these analytical results is an intersection of 8.65 grams per tonne (g/t) gold, 47.6 g/t silver and 37.3 g/t tellurium over 2.98 meter core length in hole COD18-33, including 13.8 g/t gold, 46.2 g/t silver and 47.8 g/t tellurium over 0.90 meter core length. This gold-bearing interval (quartz vein and adjacent altered granodiorite) in hole COD18-33 is located at approximately 50 meter vertical depth and approximately 100 meters southwest of the area of 2017 trenching.  COD18-33 is located approximately 170 meters southwest of hole COD17-14 which intersected the 4.59 g/t gold over 16.03 meters, including 10.96 g/t gold over 5.97 meters (News Release of September 7, 2017).

The 2018 drilling program to date has been mainly focused on testing and defining the COD Vein, a Dentonia/Jewel style quartz vein. Trenching during 2017 exposed the northeast – southwest striking COD Vein for over 160 meter strike length. The 2018 drilling program has also tested the continuation of the Everest Vein, which is located approximately 600 meters southwest of the COD Vein worksite. The Everest Vein was first discovered by Company prospectors during the 2017. Chip samples collected in 2017 across the approximate 0.4 meter wide vein exposure returned up to 52.8 g/t gold and 377 g/t silver while a grab sample of a quartz vein boulder broken off the outcrop by the excavator returned 81.8 g/t gold and 630 g/t silver (News Release of August 21, 2017).

Previous drill core analytical results from the 2018 drilling program are reported in News Releases of May 29, June 14, June 27, July 11 and July 19. The highlight of the 2018 drilling program to date is 14.62 g/t gold, 150.2 g/t silver and 102.0 g/t tellurium over 2.1 meter core length in hole COD18-3 at the COD Vein.

The analytical results listed below are highlights from drill holes DDCOD18-31 to DDCOD18-33 (intersections greater than 1 g/t gold), testing the continuation of the COD Vein south-southwest of the 2017 trench. Since true widths cannot be accurately determined from the information available the core lengths (meters) are reported. The Gold, Silver and Tellurium analyses are reported in grams per tonne (g/t).

Hole ID From (m) To (m) Interval Length (m) Au (g/t) Ag (g/t) Te (g/t)
COD18-32 44.09 45.60 1.51 3.67 67.2 30.4
COD18-33 58.52 61.50 2.98 8.65 47.6 37.3
including 58.52 59.93 1.41 7.91 26.9 30.9
including 59.93 60.60 0.67 3.3 93.2 36.9
including 60.60 61.50 0.90 13.8 46.2 47.8

 

The interval of 44.09-45.60 meters in COD18-32 is quartz vein / quartz breccia with some silicified granodiorite in the lower part of the section. The interval of 58.52-61.50 meters in COD18-33 is altered granodiorite (58.52-59.93 meters) and quartz vein (59.93-61.50 meters).

Drill core from the 2018 program was geologically logged and sampled. Drill core was sawn in half with half core samples submitted for analysis and remaining half core stored in a secure location. Core samples were delivered to the ALS Minerals laboratory in Vancouver to be analyzed for gold by Fire Assay – AA. The samples were also analyzed for 48 Elements by Four Acid and ICP-AES / ICP-MS. Quality control (QC) samples were inserted at regular intervals.

To view the graphic in its original size, please click here

David Martin, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

To view the Original News release with pictures please go to the website or contact the company.

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

[email protected]

Investor Relations:

Mr. Jack Singh, 604-488-3900   [email protected]

“ We don’t have to do this, we get to do this “

“The Crew”

(more…)

$AAO.ca Augusta Provides Updates

Posted by AGORACOM at 9:32 AM on Monday, July 16th, 2018

Augusta Provides Updates

    • FOX-TEK’s Clean Growth Program was not on the 100 asked to proceed to the next stage.
    • It was identified, at the expert evaluation stage, as being a project having substantial merit
    •  Augusta’s annual and special shareholders’ meeting was held on July 11, 2018

Toronto, Ontario–(Newsfile Corp. – July 16, 2018) – Augusta Industries Inc. (TSXV: AAO) (the “Corporation”), a developer and marketer of patented non-intrusive sensing systems, would like to provide a general update.

Clean Growth Program Further to its press release of March 5, 2018, the Corporation reports that the letter of intent that was submitted by its wholly owned subsidiary, Fox-Tek Canada Inc. (“Fox-Tek”), to the Green Growth Program was not chosen as one of the 100 proposals to proceed to the full project proposal stage.

The Clean Growth Program covers five areas focused on pressing environmental challenges and economic opportunities facing Canada’s natural resource operations:

  • Reducing greenhouse gas and air-polluting emissions.
  • Minimizing landscape disturbances and improving waste management.
  • The production and use of advanced materials and bio-products.
  • Efficient energy use and productivity.
  • Reducing water use and impacts on aquatic ecosystems.

The program received approximately 750 proposals and of these, only 400 proposals were selected for expert evaluation, of which Fox-Tek’s proposal, which was focused on landscape disturbances and waste management in the energy sector, was one of those chosen. Of the 400 proposals, only 100 were invited to participate in the full project proposal stage. Due to the high number of quality submissions received by the Clean Growth Program, Fox-Tek’s proposal was not on the 100 asked to proceed to the next stage.

Although the Fox-Tek proposal will not be participating in the full project proposal stage, it was identified, at the expert evaluation stage, as being a project having substantial merit. As such, the Clean Growth Program has notified Fox-Tek that it will be introducing the company’s proposal to the Clean Growth Hub and other federal and/or provincial programs with the intention of securing government funding to proceed with its proposal.

The Clean Growth Hub is a “whole-of-government” focal point for the Government of Canada’s clean technology ecosystem focused on supporting companies and projects.

Shareholders’ Meeting

The Corporation is pleased to announce that at its annual and special shareholders’ meeting held on July 11, 2018, the shareholders approved the following matters:

  1. The appointment of Messieurs Allen Lone, Warren Goldberg, Tony Boogmans, Steve Ewaskiw and Jay Vieira as directors.
  2. The appointment of Wasserman Ramsay, Chartered Accountants, as auditors of the Corporation.
  3. The ratification of the Corporation’s stock option plan.
  4. The proposed change of business of the Corporation from an ‘industrial issuer’ to an ‘investment issuer’.
  5. The proposed change of the Corporation’s name from its current form to “IntellaEquity Inc.”
  6. The proposed sale of all of the issued and outstanding securities of Fox-Tek to Mooncor Oil & Gas Corp. pursuant to an amalgamation agreement dated June 11, 2018.
  7. The proposed consolidation of the Corporation’s issued and outstanding common shares on an one (1) for up to twenty (20) basis.
  8. The proposed delisting of the Corporation’s common shares from the TSX Venture Exchange and the listing of its shares for trading through the facilities of the Canadian Securities Exchange.

The Corporation would like to thank all of its shareholders that voted their shares in favor of the matters presented and the Corporation will provided updates on same as they become available.

Extension of Warrants

The Corporation will also like to announce that it has received TSX Venture Exchange approval and as of July 14, 2018, the expiry date of the 20,200,000 common share purchase warrants (the “Warrants”) of the Corporation was extended from July 14, 2018 to July 14, 2020.

The Warrants, which were originally issued on July 14, 2015, were issued pursuant to the Corporation’s private placement offering of 20,200,000 units. Each Unit was comprised of one (1) common shares and one (1) common share purchase warrant (the “Warrant”). Each Warrant entitles the holder thereof to acquire one (1) common share at an exercise price of $0.07 per share at any time until close of business on July 14, 2018.

Each Warrant, as amended, will entitle the holder thereof to purchase one common share of the Corporation at any time until the close of business on July 14, 2020 at an exercise price of $0.07 per common share. All other provisions of the Warrants will remain the same.

About the Corporation:

Through its wholly owned subsidiaries, Marcon International Inc. (“Marcon”), Paragon Blockchain Inc. (“Paragon”) and Fox-Tek, the Corporation provides a variety of services and products to a number of clients.

Marcon is an industrial supply contractor servicing the energy sector and a number of US Government entities. Marcon’s principal business is the sale and distribution of industrial parts and equipment (Electrical, mechanical and Instrumentation.) In addition to departments and agencies of the U.S. Government, Marcon’s major clients include Saudi Arabia-Sabic Services (Refining and Petrochemical), Bahrain National Gas Co, Bahrain Petroleum, Qatar Petroleum, Qatar Gas, Qatar Petrochemical, Gulf of Suez Petroleum, Agiba Petroleum and Burullus Gas Co.

Fox Tek develops non-intrusive asset health monitoring sensor systems for the oil and gas market to help operators track the thinning of pipelines and refinery vessels due to corrosion/erosion, strain due to bending/buckling and process pressure and temperature. The Corporation’s FT fiber optic sensor and corrosion monitoring systems allow cost-effective, 24/7 remote monitoring capabilities to improve scheduled maintenance operations, avoid unnecessary shutdowns, and prevent accidents and leaks.

Paragon has the potential to unlock substantial new opportunities capable of impacting the business of Marcon. Specifically, Marcon seeks to create an eco-system in the supply chain management of clients to change the dynamics of the scoping and bidding process by providing vendors and subcontractors with A.I. data mining tools to proactively drive the process. Blockchain technology is of critical importance to Fox-Tek as well particularly the expansion of its’ non-intrusive technology in the oil & gas industry, whose clients include many of the biggest companies in the world.

Corporation contact:

Allen Lone, President and C.E.O
Tel: (905) 275 -8111 Ext 226
email: [email protected]

Posted by AGORACOM at 10:45 AM on Wednesday, July 11th, 2018

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png

  • Assays returned for holes COD18-17 to COD18-26 which tested the COD Vein
  • Hole COD18-21 returned 6.36g/t gold, 50.8g/t silver and 45.5g/t tellurium over 0.87 meter core length in hole COD18-21
  • Hole COD18-26 returned 10.3g/t gold over a 2.35 meter interval

Vancouver, British Columbia (FSCwire)GGX Gold Corp. (TSX-V: GGX), (OTCQB: GGXXF), (FRA: 3SR2) (the “Company” or “GGX”) is pleased to announce the receipt of the additional analytical results from the winter-spring diamond drilling program on the Gold Drop property, located near Greenwood, B.C. Drill core analytical results have been received for 2018 drill holes COD18-17 to COD18-26 which tested the COD Vein. Highlights from these analytical results include 6.36 grams per tonne (g/t) gold, 50.8 g/t silver and 45.5 g/t tellurium over 0.87 meter core length in hole COD18-21 and 10.3 g/t gold over a 2.35 meter interval (1.4 meters actual recovered core from the 2.35 m Interval) in hole COD18-26.

Drill hole COD18-26 intersected gold bearing veins approximately 30 meters southwest of the 2017 trench. This hole was drilled approximately 100 meters southwest of 2017 drill hole COD17-14. Hole COD17-14 intersected the 4.59 g/t gold over 16.03 meters, including 10.96 g/t gold over 5.97 meters (News Release of September 7, 2017).

To view the graphic in its original size, please click here

The ongoing diamond drill program is being conducted in the Gold Drop Southwest Zone, testing and defining the COD Vein, a Dentonia/Jewel style quartz vein. Drilling is also ongoing at a separate gold bearing vein in this region, referred to as the Everest Vein. Previous drill core analytical results from the 2018 drilling program are reported in News Releases of May 29, June 4 and June 27. The highlight of the 2018 drilling program to date is 14.62 g/t gold, 150.2 g/t silver and 102.0 g/t tellurium over 2.1 meter core length in hole COD18-3 at the COD Vein. Trenching during 2017 exposed the northeast – southwest striking COD Vein for over 160 meter strike length.

The analytical results listed below are highlights from holes DDCOD18-17 to DDCOD18-26, testing the COD Vein. Since true widths cannot be accurately determined from the information available the core lengths (meters) are reported. The Gold, Silver and Tellurium analyses are reported in grams per tonne (g/t). The intervals listed in the table below are from the gold, silver and tellurium bearing vein and / or adjacent low grade mineralized host rock.

 

Hole ID From (m) To (m) Interval Length (m) Au (g/t) Ag (g/t) Te (g/t)
COD18-18 15.6 16.15 0.55 1.12 9.47 6.18
COD18-19 12.92 13.45 0.53 0.97 18.25 6.56
COD18-19 19.46 20.12 0.66 1.84 13.5 9.95
COD18-20 10.6 11.25 0.65 1.25 27.5 8.51
COD18-20 24.65 25.85 1.2 0.47 9.38 3.27
COD18-20 25.85 26.21 0.36 4.91 26.9 24.7
COD18-21 43.25 46.1 2.85 2.12 14.15 13.6
COD18-21 48.55 49.42 0.87 6.36 50.8 45.5
COD18-21 71.15 72.05 0.9 1.04 5.98 3.98
COD18-22 5.9 6.4 0.5 1.28 12.25 8.32
COD18-22 6.4 7.36 0.96 0.61 5.49 6.52
COD18-22 7.36 7.92 0.56 1.04 7.66 6.72
COD18-24 41.77 42.44 0.67 1.15 6.73 5.13
COD18-26 62 62.3 0.3 1.59 24.3 9.36
COD18-26 62.3 63.96 1.66 0.47 12.65 3.87
COD18-26 63.96 64.5 0.54 1.4 5.52 4.13
COD18-26 66.2 68.55 2.35* 10.3 1.09 0.24

 

*Broken core, true measured core recovered is 1.4 meters

Drill holes COD18-17 through COD18-26 of the 2018 drilling program tested under the southern part of the 2017 trench and further south of the 2017 trench, targeting the COD Vein. The holes south of the trench tested the continuation of the COD Vein south-southwest of the 2017 trench.

To view the graphic in its original size, please click here

Drill core is being geologically logged and sampled at the Greenwood facility. Drill core is sawn in half with half core samples submitted for analysis and remaining half core stored in a secure location. Core samples were delivered to the ALS Minerals laboratory in Vancouver to be analyzed for gold by Fire Assay – AA. The samples are also being analyzed for 48 Elements by Four Acid and ICP-AES / ICP-MS. Quality control (QC) samples are inserted at regular intervals.

David Martin, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

To view the Original News release with pictures please go to the website or contact the company.

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

[email protected]

Investor Relations: Mr. Jack Singh, 604-488-3900  

[email protected]

“ We don’t have to do this, we get to do this ”  The Crew  

Feature: Gratomic $GRAT.ca The Cleaner Carbon of Tomorrow $DNI.ca $LMR.ca

Posted by AGORACOM at 10:20 AM on Monday, July 9th, 2018

 

  • Gratomic is focused on the manufacture of high quality, high demand graphenes and graphene derivative products primarily targeted towards elastomers and polymers for automotive tires
  • Intends to cultivate and exploit Aukam graphite to facilitate the manufacture of graphenes for large volume, mass-market applications
  • Gratomic owns 63% of the Aukam graphite mine in southern Namibia which it has developed as its key asset since 2015
  • The Aukam graphite mine is a rare massive vein graphite occurrence which has formerly only been mined commercially in small veins in Sri-Lanka
  • Aukam graphite has been tested and proven in several high value applications including graphitic foils and is currently being tested by an anode manufacturer for performance quality
  • Gratomic recently announced LOI to create Blockchain ecosystem for Gratomic Graphene

 

FULL DISCLOSURE: Gratomic is an advertising client of AGORA Internet Relations Corp.

$AAO.ca FOX-TEK Completes Testing and Reports Findings to Client in India and Augusta to Extend Term of Warrants $ENB.ca

Posted by AGORACOM at 8:21 AM on Monday, July 9th, 2018

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564614/hub/augustalarge.png

  • Received a small test plate from the Corporation’s agent in India to test and provide a report to a client.
  • Objective of the test and report was to show conclusively that FOX-TEK’s EFM technology can work with a typical vessel wall where the inside surface has a number of stellite layers added
  • FOX-TEK was able to successfully demonstrate that it is possible to perform a baseline reading of the starting thickness of the provided sample using a precision ultrasonic measuring instrument.
  • This was followed by three phases of material removal from the stellite side of the plate while an EFM unit was used to measure the changes over time.

Toronto, Ontario–(Newsfile Corp. – July 9, 2018) – Augusta Industries Inc. (TSXV: AAO) (the “Corporation”), a developer and marketer of patented non-intrusive sensing systems, is pleased to announce that its wholly owned subsidiary, FOX-TEK Canada Inc. (“FOX-TEK”), has received a small test plate from the Corporation’s agent in India to test and provide a report to a client.

The objective of the test and report was to show conclusively that FOX-TEK’s EFM technology can work with a typical vessel wall where the inside surface has a number of stellite layers added. Two methods were used to measure both the baseline thickness of the sample, the first a standard UT tool was used to measure the baseline thickness of the plate. Secondly, for the rest of the tests, a small EFM array was installed on the non-stellite side of the plate. A small test plate (roughly 6 by 6 inches) was provided to FOX-TEK by its agent on behalf of the client. One side of the test plate had layers of stellite welded on. This test sample represents a small sample of an actual issue where the inside material is eroded by the process internal to the vessel.

FOX-TEK was able to successfully demonstrate that it is possible to perform a baseline reading of the starting thickness of the provided sample using a precision ultrasonic measuring instrument. This was followed by three phases of material removal from the stellite side of the plate while an EFM unit was used to measure the changes over time.

FOX-TEK prepared a report summarizing its findings from the testing and has forwarded same to its agent and client. FOX-TEK will be working with its agent and the client in order to move this project forward.

The Corporation will also like to announce that, subject to the receipt of TSX Venture Exchange, it has agreed to amend the expiry date of the 20,200,000 common share purchase warrants (the “Warrants”) of the Corporation from July 14, 2018 to July 14, 2020.

The Warrants, which were originally issued on July 14, 2015, were issued pursuant to the Corporation’s private placement offering of 20,200,000 units. Each Unit was comprised of one (1) common shares and one (1) common share purchase warrant (the “Warrant”). Each Warrant entitles the holder thereof to acquire one (1) common share at an exercise price of $0.07 per share at any time until close of business on July 14, 2018.

Each Warrant, as amended, will entitle the holder thereof to purchase one common share of the Corporation at any time until the close of business on July 14, 2020 at an exercise price of $0.07 per common share.

The Warrants will be amended, effective July 14, 2018, to extend the term of the Warrants until July 14, 2020. All other provisions of the Warrants will remain the same.

About the Corporation:

Through its wholly owned subsidiaries, Marcon International Inc. (“Marcon”), Paragon Blockchain Inc. (“Paragon”) and FOX-TEK, the Corporation provides a variety of services and products to a number of clients.

Marcon is an industrial supply contractor servicing the energy sector and a number of US Government entities. Marcon’s principal business is the sale and distribution of industrial parts and equipment (Electrical, mechanical and Instrumentation.) In addition to departments and agencies of the U.S. Government, Marcon’s major clients include Saudi Arabia-Sabic Services (Refining and Petrochemical), Bahrain National Gas Co, Bahrain Petroleum, Qatar Petroleum, Qatar Gas, Qatar Petrochemical, Gulf of Suez Petroleum, Agiba Petroleum and Burullus Gas Co.

Fox Tek develops non-intrusive asset health monitoring sensor systems for the oil and gas market to help operators track the thinning of pipelines and refinery vessels due to corrosion/erosion, strain due to bending/buckling and process pressure and temperature. The Corporation’s FT fiber optic sensor and corrosion monitoring systems allow cost-effective, 24/7 remote monitoring capabilities to improve scheduled maintenance operations, avoid unnecessary shutdowns, and prevent accidents and leaks.

Paragon has the potential to unlock substantial new opportunities capable of impacting the business of Marcon. Specifically, Marcon seeks to create an eco-system in the supply chain management of clients to change the dynamics of the scoping and bidding process by providing vendors and subcontractors with A.I. data mining tools to proactively drive the process. Blockchain technology is of critical importance to FOX-TEK as well particularly the expansion of its’ non-intrusive technology in the oil & gas industry, whose clients include many of the biggest companies in the world.

Corporation contact:

Allen Lone, President and C.E.O
Tel: (905) 275 -8111 Ext 226
email: [email protected]

$GGX.ca GGX Gold Successfully Processes Bulk Sample from the Everest Vein – Gold Drop Gold Property, Southern British Columbia $K.ca $GZD

Posted by AGORACOM at 1:08 PM on Thursday, July 5th, 2018

 

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png

  • Successful extraction and processing of a bulk sample from the Everest gold bearing vein at the Gold Drop Gold Property.
  • Sampling was designed to identify the style of mineralization of the Everest vein
  • Gold content of the 18.05 kg sample to be 20.51 grams per tonne gold

 

To view the graphic in its original size, please click here

Vancouver, British Columbia (FSCwire)GGX Gold Corp. (TSXV: GGX), (OTCQB: GGXXF),(FRA: 3SR2) (the “Company” or “GGX”) is pleased to announce the successful extraction and processing of a bulk sample from the Everest gold bearing vein at the Gold Drop Gold Property. The Everest vein is located in the Gold Drop Southwest Zone.

The sampling was designed to identify the style of mineralization of the Everest vein and determine whether a gold table could be used as a separation tool for concentrating the vein hosted mineralization.

Remember the old saying :

‘ We Drill for Structure …and… We drift for Grade ’

 

To view the graphic in its original size, please click here

The test used random vein material from the Everest vein. The sample was collected from surface vein material in the area of the 2018 drilling program. The material was crushed using jaw-rolls crushers and screened to 20 (0.90 mm) mesh. The material from the Everest vein was run through the crusher twice.

To view the graphic in its original size, please click here

The crushed, screened and weighed material was fed through gold shaker table. The samples were collected from the discharges and shipped to Vancouver ALS Canada laboratory for Gold, Silver and Multi-element analysis. The table, buckets and crushers were cleaned before and between sampling. The results of the test are displayed in the following table.

Everest vein Samples Weight (kg)
Crush 18.05 Au (g/t) Ag (g/t) Te (g/t) Averaged Au (g/t)
11101 0.18 Concentrates 509 5110 >500
11102 0.38 Midlings 74.14 676.2 403
11103 7.94 Tailings 14.35 121 97.8
20.51

The values obtained were used to calculate the gold content of the 18.05 kg sample to be 20.51 grams per tonne gold. Since the entire pail of tailings was not dried and weight, the total tailings weight is assumed to be initial crush minus the concentrates and midlings.

The bulk sample test shows successful concentration of vein minerals using the gold shaker table technique. The gold shaker table requires continuous feed to operate properly and therefore the riffles had to be cleared. During the clean up some minor cross contamination between the midlings and tailings may have occurred. The gold found in tailings may be explained by the finesse of the gold particle size. The gold table technique requires rigorous fine tuning to optimize the separation and capture of minerals. The company is pleased with these initial results.

The company plans to test an iCON gravimetric concentrator and compare the recoveries to the gold shaker table results.

Robert Tilsley, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

To view the Original News release with pictures please go to the website or contact the company.

 

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

[email protected]

Investor Relations: Mr. Jack Singh, 604-488-3900   [email protected]

“ We don’t have to do this, we get to do this ” 

The Crew

$AAO.ca $21.5M sale of FOX-TEK to Mooncor signals a new day dawning for Augusta Industries

Posted by AGORACOM at 8:39 AM on Thursday, July 5th, 2018

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564614/hub/augustalarge.png

 

  •  A Canadian company made up of two key subsidiaries – FOX-TEK and Marcon.
  • Augusta is engaged in the development, design, manufacture and supply of systems using fiber optic sensors, related monitoring instruments, and software
  • The Company announced the sale of one of its’ two subsidiaries (FOX-TEK) for up to C$21.5 million, consisting of $9,500,000 in common stock of the acquirer (Mooncor) and additional potential royalties of $12,000,000.

Augusta Industries Inc. (TSXV: AAO) is a Canadian company made up of two key subsidiaries – FOX-TEK and Marcon. The Company has recently sold FOX-TEK to Mooncor Oil & Gas Corp. Augusta is engaged in the development, design, manufacture and supply of systems using fiber optic sensors, related monitoring instruments, and software. These systems serve the needs of the oil and gas, power generation, chemical, mining, and civil structure market sectors worldwide.

An experienced management and technical team lead operations and expansion in North America and locations around the world.

Augusta Industries clients include Canadian Natural, Shell, Chevron, and Petron. Augusta has industrial relationships with many US Government departments including, the Department of the Interior, Homeland Security, US Army, US Navy, US Air force and NASA. Internationally clients also include Kuwait Oil Company and Qatar Gas.

Augusta Industries subsidiary FOX-TEK handles the installation and reporting of information on an outsourcing basis. FOX-TEK also provides support engineering services related to planning, training, on-site installation, and data interpretation and reporting.

On May 28th, the Company announced the sale of one of its’ two subsidiaries (FOX-TEK) for up to C$21.5 million, consisting of $9,500,000 in common stock of the acquirer (Mooncor) and additional potential royalties of $12,000,000. Mooncor Oil and Gas Corp. is a Canadian junior oil and gas exploration and development company. Augusta plans to distribute a portion of the consideration shares to shareholders.

Regarding the portion to distribute, CEO Allen Lone states: “It will be in the 25% range. If you do the math, 25% of $9.5M is $2.37M being returned to shareholders. At a market cap of $6.5M (as on May 28, 2018), that amounts to an approximate 35% return to current shareholders. Plus the remaining shares go on the balance sheet of the company and royalty payments could add substantial cash to the company in the coming years. Not bad. Not bad at all.”

With a current market cap of just C$ 5.1 million, it becomes very obvious that both the Company and the shareholders will benefit greatly from the sale of FOX-TEK for up to $21.5 million.

Marcon International is Augusta Industries other subsidiary. Marcon is involved in the industrial supply of equipment and parts procuring for its clients, which are principally clients in the oil and gas industry and United States government agencies.

Initially the Company had focused on providing services in the energy sector but has moved on to also work with Government contracts and Government services. Marcon itself has two subsidiaries, Marcon USA and Marcon UK, to help enhance and support its logistic and sales operations. Over the years it has established a great reputation of being a consistent performer for its clients in the Government as well as the international oil and gas industry.

As CEO Allen Lone states: “A new day is dawning for Augusta and investors, both old and new.” Investors should definitely take a look at this undervalued gem.

$GGX.ca GGX Gold Intersects 8.71 g/t Gold, 114 g/t Silver and 67.8 g/t Tellurium – Over 0.86 meters, Gold Drop Property, Southern British Columbia $K.ca $GZD.ca

Posted by AGORACOM at 9:34 AM on Wednesday, June 27th, 2018

https://s3.amazonaws.com/s3.agoracom.com/public/companies/logos/564602/hub/ggx_large.png

  • Analytical results have been received for drill holes DDCOD18-7 to DDCOD18-16, targeting the COD vein
  • DDEVE18-1 to DDEVE18-4 targeting the Everest vein, both within the Gold Drop Southwest Zone
  • DDCOD 18-11 returned 8.71 g/t gold, 114 g/t silver and 67.8 g/t tellurium over 0.86m
  • DDCOD18-7 at the COD Vein 7.53 g/t gold, 70.9 g/t silver and 45.1 g/t tellurium over 0.76 meter core

Vancouver, British Columbia (FSCwire)GGX Gold Corp. (TSXV: GGX) (the “Company” or “GGX”) is pleased to announce drill core analytical results from this winter’s Phase III diamond drilling program on the Gold Drop Property, located near Greenwood, BC. Analytical results have been received for drill holes DDCOD18-7 to DDCOD18-16, targeting the COD vein and DDEVE18-1 to DDEVE18-4 targeting the Everest vein, both within the Gold Drop Southwest Zone. Highlights include 8.71 g/t gold, 114 g/t silver and 67.8 g/t tellurium over 0.86 meter core length in DDCOD18-11 and 7.53 g/t gold, 70.9 g/t silver and 45.1 g/t tellurium over 0.76 meter core length in DDCOD18-7 at the COD Vein. The best COD Vein intercept to date from the 2018 drill program is 14.6 g/t gold, 150 g/t silver and 102 g/t tellurium over 2.1 meter core length in DDCOD-18-3 (News Release of May 29, 2018).

 

To view the graphic in its original size, please click here

The ongoing diamond drill program is designed to test and further define the COD Vein, a Dentonia/Jewel style quartz vein, located in the Gold Drop Southwest Zone. Trenching during 2017 has exposed the northeast – southwest striking COD Vein for over 160 meter strike length. Drilling is also testing the Everest Vein in the area of a 2017 trench, located approximately 600 meters southwest of the COD Vein. Chip samples collected in 2017 across the approximate 0.4 meter wide vein exposure returned up to 52.8 g/t gold and 377 g/t silver while a grab sample of a quartz vein boulder broken off the outcrop by the excavator returned 81.8 g/t gold and 630 g/t silver (News Release of August 21, 2017). During 2017 forty meters of trenching was completed on the newly discovered Everest gold bearing quartz vein.

The analytical results reported in this News Release are highlights from holes 7 through 16 of the 2018 drilling program on the COD Vein, and holes 1 through 4 on the Everest Vein. Since true widths cannot be accurately determined from the information available the core lengths (meters) are reported. The gold and silver analyses are reported in grams per tonne (g/t). The intervals listed in the following table are from the gold and silver bearing vein and / or adjacent low grade mineralized host rock.

 

Hole ID From (m) To (m) Interval Length (m) Au (g/t) Ag (g/t) Te (g/t)
COD18-7 24.97 26.21 1.24 1.14 11.2 8.37
COD18-7 26.21 26.97 0.76 7.53 70.9 45.1
COD18-8 26.71 27.35 0.64 1.78 15.1 11
COD18-8 27.35 28.25 0.9 0.23 2.47 2.32
COD18-8 28.25 29.06 0.81 1.3 7.02 4.87
COD18-9 31.42 32.41 0.99 2.48 19.15 14.15
COD18-11 42.7 43.56 0.86 8.71 114 67.8
COD18-12 65.84 66.42 0.58 1.23 7.89 5.93
COD18-14 17.9 18.71 0.81 0.86 7.12 5.19
COD18-14 18.71 19.4 0.69 5.54 47.1 34.1
COD18-15 12.85 13.87 1.02 1.18 12.05 8.08
COD18-15 25.85 26.75 0.9 5.89 77.6 60.3
COD18-16 32.2 32.61 0.41 3.13 18.9 14.35
COD18-16 32.61 33.1 0.49 1.89 19.55 18.45
COD18-16 36.43 37.2 0.77 0.92 5.34 5.34
EVE18-2 20.9 21.4 0.5 2.04 18.85 14.05
EVE18-2 21.4 22.2 0.8 0.84 7.31 5.66
EVE18-2 22.2 23 0.8 1.3 11.25 8.64
EVE18-3 43.82 44.6 0.78 1 9.64 6.24
The most significant gold mineralization is found in the COD Dentonia/Jewel style quartz vein (including 26.21-26.97 meters in DDCOD18-7, 42.70-43.56 meters in DDCOD18-11, 18.71-19.40 meters in DDCOD18-14, and 25.85-26.75 meters in DDCOD18-15).  The vein is mineralized with pyrite and trace chalcopyrite and telluride minerals. Surrounding alteration is a magnetite destructive silicification and chlorite alteration. Strong fine disseminated pyrite is often found in these alteration zones. Significant gold mineralization occurs locally in the altered host rock such as 12.85-13.87 meters in DDCOD18-15 and 21.4-23.0 meters in Everest hole DDEVI18-2 (adjacent to the gold bearing vein at 20.9-21.4 meters).

To view the graphic in its original size, please click here

 

Hole ID Dip Azimuth Depth (m)
COD18-7 52 354 47.55
COD18-8 65 354 62.79
COD18-9 75 354 93.27
COD18-10 55 338 71.34
COD18-11 45 280 65.84
COD18-12 55 291 87.17
COD18-13 45 261 68.89
COD18-14 45 351 41.45
COD18-15 55 351 50.6
COD18-16 65 351 50.6
EVE18-1 50 85 47.85
EVE18-2 45 68 47.85
EVE18-3 55 68 66.14
EVE18-4 46 45 56.39
Observed core vein contact angles indicate the COD vein is sub-vertical being structurally controlled by the host rock. The predominant host rock for the COD vein is a massive and competent medium grain granodiorite of the Antsey Pluton. Faulting does occur however the general north south trend of the vein is predictable.

 

To view the graphic in its original size, please click here

 

To view the graphic in its original size, please click here

 

Drill core is being geologically logged and sampled at the Greenwood facility. Drill core is sawn in half with half core samples submitted for analysis and remaining half core stored in a secure location. Core samples were delivered to the ALS Minerals laboratory in Vancouver to be analyzed for gold by Fire Assay – AA. The samples are also being analyzed for 48 Elements by Four Acid and ICP-AES / ICP-MS. Quality control (QC) samples are inserted at regular intervals.

David Martin, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the technical information contained in this News Release.

On Behalf of the Board of Directors,

Barry Brown, Director

604-488-3900

Investor Relations: 

Mr.  Jack Singh: 604-488-3900     E-mail: [email protected]

“ We don’t have to do this, we get to do this ” 

The Crew