Property covers the past producing Colt Mesa Mine, a copper deposit with associated cobalt, zinc, nickel and molybdenum mineralization.
Recent sampling (CM-18-01) returned values of 0.88(%) copper (Cu), 2.31% cobalt (Co), 9.31 % zinc (Zn), +1.00 % nickel (Ni), and 0.29 % molybdenum (Mo), over a 0.3 meter chip sample of surface exposure near the adit portal.
Area recently became open for staking and exploration after a 21 year period moratorium, due to the reduction of the “Grand Staircase Escalante National Monument†by President Trump in December 2017.
1975 grab sampling reported values from 0.07% to 29.50 % copper (Cu), 0.01% to 0.67 % cobalt (Co), 0.03% to 3.30 % zinc (Zn), 0.02% to 0.27 % nickel (Ni), and trace to 0.17 % molybdenum (Mo). The Company cautions investors grab samples are selected samples and are not necessarily representative of the mineralization on the Colt Mesa property.
Posted by AGORACOM
at 12:43 PM on Thursday, January 24th, 2019
Drilling occurred in northwest region of the property, 1.5 km NW of the historic Keymet Mine.
Ky-18-14: 7.89% zinc equivalent over 34.3 meters (From 46.20 m to 80.50 m)
Elmtree 12 vein: System traced to approximately 145 meters depth, open at depth
Elmtree 12 vein: Strike length of approximately 110 meters and open along strike
The Company’s focus since acquiring the Keymet Property is the area of reported polymetallic veins with most work in the area of the Elmtree 12 copper-lead-zinc-silver bearing vein system.
At least seven vein occurrences with lead, zinc and +/- copper, silver and gold are reported in this region of the property in addition to the polymetallic veins reported at the historic Keymet Mine
FULL DISCLOSURE: Great Atlantic is an advertising client of AGORA Internet Relations Corp
Posted by AGORACOM
at 9:23 AM on Thursday, January 24th, 2019
Launching Graphene Ultra Fuel Efficient Tires (GUET) toward the end of summer 2019
Gratomic certification and terrain testing targeted for completion in Q3, 2019
Gratomic anticipates GUET to be the first range of Graphene-enabled ultra fuel-efficient tires
Gratomic will now target mass market sales demand via Graphene Ultra Fuel Efficient Tires (GUET)
About Gratomic Inc.
Gratomic
is an advanced material company focused on mine to market
commercialization of graphite products, most notably high-value
graphene-based components for a range of mass market products.
FULL DISCLOSURE: Gratomic is an advertising client of AGORA Internet Relations Corp.
Posted by AGORACOM
at 9:22 AM on Thursday, January 24th, 2019
Dr. Xiang-Qun (Sean) Xie has joined its Scientific Advisory Board
Dr. Xie has over 30 years of experience in the fields of Genomics, Cancer Research
Has multiple patents that have been licensed to BioTech and Pharmaceutical companies
LOS ANGELES, Jan. 24, 2019 (GLOBE
NEWSWIRE) — Applied BioSciences Corp. (OTCQB: APPB), a diversified
cannabinoid therapeutics company focused on the medical, bioceutical and
pet health industries, announced that Dr. Xiang-Qun (Sean) Xie has
joined its Scientific Advisory Board. Dr. Xie has over 30 years of
experience in the fields of Genomics, Cancer Research and has multiple
patents that have been licensed to BioTech and Pharmaceutical
companies.
Although the health benefits of Cannabis and CBD are becoming well known, one of the challenges is the research and development of products for both the consumer, adult-use and pharmaceutical market. Many universities and doctors have been unable to research and access scientific data on the molecules and effect of phytocannabinoids.
The company continues to add professionals who are expert in relevant fields, such as scientific research and development, FDA procedures and medicine. These professionals will provide the company with an outstanding base of knowledge and experience to build on and advance the development of additional products. With the addition of several prominent scientists and physicians and their knowledge base, clinical trials, product development, and design procedures for submitting products to the FDA can be done in an expedited time frame.
Dr Xiang-Qun (Sean) Xie is an Associate Dean
for Research Innovation at the School of Pharmacy and a Professor of
Pharmaceutical Sciences/Drug Discovery Institute, and a PI of an
integrated Medicinal Chemistry Biology laboratory of CompuGroup,
BioGroup and ChemGroup at the University of Pittsburgh. He is a member
of the Science Advisory Board to the US Food and Drug Administration
(FDA). He is a Founding Director of Computational Chemical Genomics
Screening Center, and a Director/PI of NIH National Center of Excellence
for CDAR. He holds joint positions at Dept of Computational Biology and
Dept of Structural Biology, and Pitt Cancer Institute MT/DD Program. He
is an Editorial Advisory Board member for the AAPS Journal and American
Journal.
“I have been impressed with the Applied BioSciences team
and their experience in the Cannabis and CBD space and use of
analytical science and best practices of testing in the manufacturing of
products. I look forward to bringing my own background in research and
development of compounds, patents to help further commercialize
products that help to treat and provide the natural healing and
properties of both Cannabis and CBD,†commented Dr Xie.
“Applied
BioSciences continues to develop, produce and commercialize products for
the consumer, medical and the over-the-counter market to treat
ailments, as well as for general health and wellness. Research and
scientific formulation are at the heart of everything we do. As the
company continues to expand our product lines, it is important to expand
our scientific and research development pipeline and partner with
leaders in the space. We will now be able to expand the addressable
market of our products and focus on additional scientific research,
clinical data and patents to expand our product portfolio,†commented
Chris Bridges, President of Applied BioSciences Corp.
Applied
BioSciences products use base ingredients that are USDA Organic and
non-GMO. Offering Vegan, sugar-free, 99% Pure CBD Isolate infused. The
products are formulated with CBD extracted from pesticide-free,
organically grown, domestically produced, High-CBD Industrial Hemp.
Lab-tested and guaranteed Pesticide and Chemical-free. Our proprietary
blends also contain USDA certified organic botanicals, herbals and
essential oils to provide synergy with other healing elements found in
nature.
About Applied BioSciences Corp. Applied BioSciences Corp. (www.appliedbiocorp.com),
is a diversified company focused on multiple areas of the medical,
bioceutical and pet health industry. As a leading company in the CBD and
Pet health space, the company is currently shipping to the majority of
US states as well as to 5 International countries. The company is
focused on select investment, consumer brands, and partnership
opportunities in the recreational, health and wellness, nutraceutical,
and media industries.
About Trace Analytics Inc. Trace
Analytics Inc. is a leading cannabis science and technology company
with significant footprints in lab testing, research and development and
licensing. Trace Analytics was started by a group of scientists who
specialized in analytical chemistry, genetics and molecular biology.
The focus of the team is to ensure compliance with public safety
standards and end user safety. Trace Analytics is in the process of
expanding throughout the United States, and globally. With the goal of
helping the rest of the world adopt “best practices” in cannabis and
hemp testing, the company also provides expert consulting services to
legislators and regulators in many countries, states and municipalities
around the world. For more information, please visit:
http://traceanalytics.com
Posted by AGORACOM
at 9:56 AM on Wednesday, January 23rd, 2019
Applied for a diamond drilling permit for the Company’s Golden Promise Jaclyn Main Zone (JMZ) and Jaclyn North Zone (JNZ)
In-fill drilling in west half of JMZ within conceptual pit-constrained area.
Explore along projected strike east of JNZ in area of high-grade quartz boulders (boulder samples of 163, 208 and 332 g/t gold
VANCOUVER, BC / ACCESSWIRE / January 23, 2019 / GREAT ATLANTIC RESOURCES CORP. (TSXV.GR) (the “Company” or “Great Atlantic”)
is pleased to announce it has applied for a diamond drilling permit for
the Company’s Golden Promise Gold Property, located in the central
Newfoundland gold belt. The application is for up to 50 drill holes (up
to 6,500 meters) in the northern half of the property at the Jaclyn
Zone, specifically at the Jaclyn Main Zone (JMZ) and Jaclyn North Zone
(JNZ). Pending approval of the drilling permit and financing, the
Company plans to begin drilling during spring 2019, with the following
focus:
In-fill drilling in west half of JMZ within conceptual pit-constrained area.
Both shallow and deeper drilling in central-east region of JMZ.
Provide data for up-dated JMZ mineral resource estimate, engineering studies and studies of mineralizing controls.
Explore
along projected strike east of JNZ in area of high-grade quartz
boulders (boulder samples of 163, 208 and 332 g/t gold – News Release of
August 31, 2017).
The Company recently reported a
National Instrument 43-101 mineral resource estimate for the JMZ (News
Release of December 6, 2018; and Sedar-filed National Instrument 43-101
Technical Report on the Golden Promise Property, Central Newfoundland
(revised), dated December 4, 2018 by Mr. Greg Z. Mosher, M.Sc. App.,
P.Geo., and Mr. Larry Pilgrim, B.Sc., P.Geo.). The reported inferred
mineral resource estimate for the JMZ is as follows:
Resource
Cutoff Au g/t
Au Cap g/t
Au Uncap g/t
Tonnes
Au Ounces Capped
Au Ounces Uncapped
Total
1.1
9.3
10.4
357,500
106,400
119,900
Pit-Constrained
0.6
11.4
14.1
157,300
57,800
71,200
Underground
1.5
7.5
7.6
200,200
48,600
48,700
Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability.
There is no certainty that all or any part of the Mineral Resources estimated will be converted into Mineral Reserves.
Mineral
resource tonnage and contained metal have been rounded to reflect the
accuracy of the estimate, and numbers may not add due to rounding.
Mineral resource tonnage and grades are reported as undiluted.
Contained Au ounces are in-situ and do not include recovery losses
The
majority of 2019 planned diamond drill holes at the Golden Promise
Property will be in-fill drill holes in the west section of the JMZ in
the conceptual pit-constrained area. Some drilling is planned for the
central-east section of the JMZ. Historic drilling in this part of the
JMZ is less concentrated versus the west section. Planned drilling in
the central-east section of the JMZ will include near-surface drilling
to test continuation of gold mineralization to near-surface, and some
deeper holes. The drilling program will provide data for an up-dated JMZ
mineral resource estimate, engineering studies and studies of
mineralizing controls. Up to nine drill holes are planned testing
continuation of the JNZ east along projected strike. The Company
conducted trenching during 2017 along the projected east strike of the
JNZ. The trenching generally failed to reach bedrock due to thick
glacial till. However gold bearing quartz vein boulders were excavated
from multiple trenches, with some boulder samples returning high grade
gold (including 163.99, 208.51 and 332.67 g/t gold: News Release of
August 31, 2017). A qualified person managed the 2017 trenching program
and sampling and verified the analytical data.
The Golden Promise
Property hosts multiple gold bearing quartz veins and is located in a
region of recent significant gold discoveries. The property is located
within the Exploits Subzone of the Newfoundland Dunnage Zone. Within the
Exploits Subzone, the property lies along the north-northwestern fringe
of the Victoria Lake Supergroup (VLSG), a volcano-sedimentary terrane.
The northwestern margin of the Golden Promise Property occurs proximal
to, and, in part, contiguous with a major (Appalachian-scale)
collisional boundary, and suture zone, known as the Red Indian Line
(RIL). The RIL forms the western boundary of the Exploits Subzone.
Recent significant gold discoveries in this region of the Exploits
Subzone include those of Sokoman Iron Corp. (TSXV.SIC) at the Moosehead Project and Marathon Gold Corp. (TSXV.MOZ) at the Valentine Lake Gold Camp.
Sokoman Iron Corp. (TSXV.SIC) recently
announced a high-grade gold discovery on its Moosehead Property,
located approximately 40 kilometers east-northeast of the Golden Promise
Property. The discovery was made during the 2018 diamond drilling
program. A drill intersection of 44.96 g/t gold over 11.90 meters core
length was reported including a 1.35 meters core length quartz vein
intersection of 385.85 g/t gold (Sokoman Iron Corp. News Release of July
24, 2018). The Valentine Lake Gold Camp of Marathon Gold Corp. (TSXV.MOZ) is
located approximately 55 kilometers southwest of the Golden Promise
Property. As reported on Marathon’s website, the Valentine Lake Gold
Camp currently hosts four near-surface, mainly pit-shell constrained,
deposits with measured and indicated resources totaling 2,691,400 oz. of
gold at 1.85 g/t gold and inferred resources totalling 1,531,600 oz. of
gold at 1.77 g/t. Readers are warned that mineralization at the
Moosehead Property and Valentine Lake Gold Camp is not necessarily
indicative of mineralization on the Golden Promise Property.
High-grade
gold is reported in quartz veins and quartz vein boulders within the
Golden Promise Property. Gold bearing quartz veins are reported in
multiple areas of the property, including at least 5 gold bearing quartz
vein systems reported in the Jaclyn Zone. Much of the reported
historical exploration within the property has been focused on the
Jaclyn Zone with gold bearing vein systems reported at the JMZ, JNZ,
Jaclyn South Zone, Jaclyn East Zone and Jaclyn West Zone. The majority
of historic drilling (2002-2010) was conducted at the JMZ. Gold bearing
veins and gold bearing float are reported in other regions of the
property. These include the Linda/Snow White vein in the southern region
and the Shawn’s Shot vein in the central region of the property.
As
reported in the National Instrument 43-101 Technical Report on the
Golden Promise Property, Central Newfoundland (revised), dated December
4, 2018 by Mr. Greg Z. Mosher, M.Sc. App., P.Geo., and Mr. Larry
Pilgrim, B.Sc., P.Geo., the JMZ was modelled as a single quartz vein
that strikes east-west and dips steeply to the south. Modelled vein
thickness was based on true thickness derived from quartz vein
intercepts. The estimate is based on 220 assays that were composited to
135 one-meter long composites. A bulk density of 2.7 g/cm3 was used.
Blocks in the model measured 15 meters east-west, 1-meter north-south
and 10 meters vertically. The block model was not rotated. Grades were
interpolated using inverse-distance squared (ID2) weighting and a search
ellipse that measured 100 meters along strike, two meters across strike
and 50 meters vertically. Grades were interpolated based on a minimum
of two and a maximum of 10 composites with a maximum of one composite
per hole so the grade of each block is based on at least two drillholes
thereby demonstrating continuity of mineralization. For the capped
mineral resource estimate, all assays that exceed 65 g/t gold were
capped at 65 g/t gold. All resources were classified as Inferred because
of the relatively wide spacing of drill holes through most of the zone.
Because
part of the vein is near surface the resource estimate was constrained
by a conceptual open pit to demonstrate reasonable prospects of eventual
economic extraction. Generic mining costs of US$2.50/tonne and
processing costs of US$25.00/tonne were used together with a gold price
of US$1,300/ounce. A conceptual pit slope of 45° was assumed with no
allowance for mining loss or dilution. Based on the combined
hypothetical mining and processing costs and the assumed price of gold, a
pit-constrained cutoff grade of 0.6 g/t was adopted. For the
underground portion of the resource a cutoff of 1.5 g/t was assumed. The
cutoff grade for the total resource is the weighted average of the
pit-constrained and underground cutoff grades.
Jaclyn Main Zone Total Inferred Mineral Resource Estimate
Resource
Cutoff Au g/t
Au Cap g/t
Au Uncap g/t
Tonnes
Au Ounces Capped
Au Ounces Uncapped
Total
1.1
9.3
10.4
357,500
106,400
119,900
Pit-Constrained
0.6
11.4
14.1
157,300
57,800
71,200
Underground
1.5
7.5
7.6
200,200
48,600
48,700
Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability.
There is no certainty that all or any part of the Mineral Resources estimated will be converted into Mineral Reserves.
Mineral
resource tonnage and contained metal have been rounded to reflect the
accuracy of the estimate, and numbers may not add due to rounding.
Mineral resource tonnage and grades are reported as undiluted.
Contained Au ounces are in-situ and do not include recovery losses
David
Martin, P.Geo., a Qualified Person as defined by NI 43-101 and VP
Exploration for Great Atlantic, is responsible for the technical
information contained in this News Release.
About Great Atlantic Resources Corp.: Great
Atlantic Resources Corp. is a Canadian exploration company focused on
the discovery and development of mineral assets in the resource-rich and
sovereign risk-free realm of Atlantic Canada, one of the number one
mining regions of the world. Great Atlantic is currently surging forward
building the company utilizing a Project Generation model, with a
special focus on the most critical elements on the planet that are
prominent in Atlantic Canada, Antimony, Tungsten and Gold. On Behalf of the board of directors
“Christopher R Anderson“
Mr. Christopher R. Anderson “Always be positive, strive for solutions, and never give up” President CEO Director 604-488-3900 – Dir
Posted by AGORACOM
at 11:08 AM on Tuesday, January 22nd, 2019
Two regional scale gold in soil and lake sediment anomalies trending 15km north-south and 14km east-west
The property covers 892 square km of ground prospective for gold.
7,458 soil samples were taken on 18 grids at a 100m line spacing and 25m sample spacing across the Ashuanipi north claim block.
Results of analyses show significant gold anomalies in all but two of the 18 grids and confirm the 15km north-south anomalous trend
VANCOUVER, British Columbia, Jan. 22, 2019 (GLOBE
NEWSWIRE) — Labrador Gold Corp. (TSX-V: LAB) (“Labrador Gold†or the
“Companyâ€) is pleased to announce results from detailed gold exploration
of its Ashuanipi project in Labrador and Quebec. The exploration
program at Ashuanipi followed up on successful results of 2017 work that
outlined two regional scale gold in soil and lake sediment anomalies
trending 15km north-south and 14km east-west. The property covers 892
square kilometres of ground prospective for gold.
A
total of 7,458 soil samples were taken on 18 grids at a 100m line
spacing and 25m sample spacing across the Ashuanipi north claim block.
In addition, 61 reconnaissance soil lines were taken over claims staked
in Labrador and Quebec following the results of the 2017 work. Results
of analyses show significant gold anomalies in all but two of the 18
grids and confirm the 15km north-south anomalous trend (See figures at
www.labradorgold.com). Analyses of the soils range from below detection
limit, <0.5 parts per billion (ppb) to 8.97g/t Au, with 67 samples
containing more than 0.1g/t Au and three samples containing more than
1g/t Au in the soil. In addition, 749 soil samples with gold
concentrations greater than the 90th percentile are considered anomalous and require detailed follow up.
Gold
anomalies do not appear to correlate with specific rock types, at least
on a regional scale, but are often associated with magnetic highs which
may be indicative of a structural control on the location of the gold.
“Results
of the detailed soil sampling at Ashuanipi has confirmed the regional
nature of the gold anomalies and indicted specific areas where gold
values are elevated above 0.1g/t and possibly related to near surface
gold enrichment,†said Roger Moss, President and Chief Executive Officer
of Labrador Gold. “These anomalies enable us to focus our exploration
at specific sites along the regional anomaly to rapidly assess the
potential for gold mineralization. Work during the coming field season
will include detailed mapping, rock sampling and, if warranted, eventual
drill testing of these anomalous areas. We anticipate an exciting field
season at Ashuanipi tracking down the source of these significant gold
anomalies.â€
“Last year’s soil sampling
program further resolved the anomalous gold trend down to the 25-metre
scale,†added Shawn Ryan, Technical Advisor to Labrador Gold. “The size
and intensity of the gold targets clearly explain the large regional
gold in lake sediment anomaly and with 164 samples running over 50 ppb
Au, 67 samples over 100 ppb Au and a high of 8,973 ppb Au it appears
that we truly have a robust mineralized system. These areas will be the
focus of aggressive exploration next season to identify high quality
drill targets.â€
The company also announces
that its major shareholder, Plethora Precious Metals Fund (‘Plethoraâ€)
has exercised 3,125,000 warrants at an exercise price of $0.13. Plethora
now holds 9,750,000 shares of the company representing 17.45% of the
issued and outstanding shares. We appreciate the continued support of
Plethora and their confidence in the exploration strategy of our
technical team.
All samples were dried in the
field before being shipped to the Bureau Veritas preparation laboratory
in Timmins, Ontario, with analyses completed at the Vancouver
laboratory. Samples were analyzed for gold and another 36 elements by
ICP-MS (inductively coupled plasma-mass spectrometry) following an aqua
regia digestion. The company routinely submits blanks, field duplicates
and certified reference standards with batches of samples to monitor the
quality of the analyses.
Roger Moss, PhD., P.Geo., is the qualified person responsible for all technical information in this release.
About Labrador Gold:
Labrador
Gold is a Canadian based mineral exploration company focused on the
acquisition and exploration of prospective gold projects in the
Americas. In 2017 Labrador Gold signed a Letter of Intent under which
the Company has the option to acquire 100% of the 896 square kilometre
(km2) Ashuanipi property in northwest Labrador and the Hopedale (458 km2) property in eastern Labrador.
The
Hopedale property covers much of the Hunt River and Florence Lake
greenstone belts that stretch over 80 km. The belts are typical of
greenstone belts around the world but have been underexplored by
comparison. Initial work by Labrador Gold during 2017 show gold
anomalies in soils and lake sediments over a 3 kilometre section of the
northern portion of the Florence Lake greenstone belt in the vicinity of
the known Thurber Dog gold showing where grab samples assayed up to
7.8g/t gold. In addition, anomalous gold in soil and lake sediment
samples occur over approximately 40 kilometres along the southern
section of the greenstone belt (see news release dated January 25th 2018 for more details). Labrador Gold now controls approximately 57km strike length of the Florence Lake Greenstone Belt.
The
Ashuanipi gold project is located just 35 km from the historical iron
ore mining community of Schefferville, which is linked by rail to the
port of Sept Iles, Quebec in the south. The claim blocks cover large
lake sediment gold anomalies that, with the exception of local
prospecting, have not seen a systematic modern day exploration program.
Results of the 2017 reconnaissance exploration program following up the
lake sediment anomalies show gold anomalies in soils and lake sediments
over a 15 kilometre long by 2 to 6 kilometre wide north-south trend and
over a 14 kilometre long by 2 to 4 kilometre wide east-west trend. The
anomalies appear to be broadly associated with magnetic highs and do not
show any correlation with specific rock types on a regional scale (see
news release dated January 18th 2018). This suggests a
possible structural control on the localization of the gold anomalies.
Historical work 30 km north on the Quebec side led to gold intersections
of up to 2.23 grams per tonne (g/t) Au over 19.55 metres (not true
width) (Source: IOS Services Geoscientifiques, 2012, Exploration and
geological reconnaissance work in the Goodwood River Area, Sheffor
Project, Summer Field Season 2011). Gold in both areas appears to be
associated with similar rock types.
The Company has 55,864,022 common shares issued and outstanding and trades on the TSX Venture Exchange under the symbol LAB.
Posted by AGORACOM
at 9:44 AM on Monday, January 21st, 2019
Option partner completed maiden drill program at the Kagoot Brook Cobalt/Manganese base metals property in New Brunswick
The two holes, 500 metre program was designed to drill along one transect across the target stratigraphy within the 4 x 1 km target area.
GREAT ATLANTIC RESOURCES CORP. (TSX-v: GR) (the “Company” or “Great Atlantic”)
is pleased to announce its option partner Explorex Resources Inc. has
completed its maiden drill program at the Kagoot Brook Cobalt/Manganese
base metals property in New Brunswick prior to the Christmas Break. The
Company completed two holes for a total 500 metres. This initial
two-hole drilling program was limited in scope and designed to drill
along one transect across the target stratigraphy within the 4 x 1
kilometre target area.
The Explorex geological crew has returned
to New Brunswick to finish processing the core produced during the
December 2018 drilling program. It is anticipated that the processing of
the core will take one week to complete, and results should be
available mid to late February.
Kagoot Brook Co – Mn – Base Metals Project
Historical
work at Kagoot Brook has delineated two drainages, two kilometres
apart, that exhibit a series of remarkably anomalous cobalt values up to
6,000 ppm* in the silts (see Explorex news releases dated May 31 and
February 14, 2018).
Follow-up stream silt sampling programs performed by the Explorex during 2018 revealed:
a
significant concentration of and a strong relationship of cobalt with
manganese and associated base metals (nickel, copper, lead and zinc);
the relative percentage of the cobalt to manganese indicates a favourable high cobalt tenor (i.e. grade component); and
a distinct upstream cut-off of the cobalt mineralization (see Explorex news release dated November 5, 2018).
The
project area is blanketed by a thin till cover with little or no
outcrop and the in-stream silt grade cut-offs are interpreted to closely
reflect the southern contact of the underlying mineralized horizon. The
grade cut-offs align well with stratigraphy adding confidence to the
>2 km inferred potential length of mineralization along the
geological trend.
*Note: The stream silt samples reported in this
release are solely designed to show the presence or absence of
mineralization and to characterize the mineralization. Silt samples are
by definition selective and not intended to provide nor should be
construed as a representative indication of grade or mineralization at
the projects.
Technical Information in this news release has been
reviewed by David Martin, P Geo., a Qualified Person as that term is
defined in NI 43-101.
Option agreement
The
Kagoot Brook property is 100 per cent owned by Great Atlantic Resources
and is subject to an underlying agreement with Explorex Resources Inc.
Explorex Resources is acquiring up to a 75-per-cent interest in the
project (please see Great Atlantic Resources’ news release dated Feb.
14, 2018).
About Great Atlantic Resources Corp.: Great
Atlantic Resources Corp. is a Canadian exploration company focused on
the discovery and development of mineral assets in the resource-rich and
sovereign risk-free realm of Atlantic Canada, one of the number one
mining regions of the world. Great Atlantic is currently surging forward
building the company utilizing a Project Generation model, with a
special focus on the most critical elements on the planet that are
prominent in Atlantic Canada, Antimony, Tungsten and Gold.
On Behalf of the board of directors
“Christopher R Anderson“
Mr. Christopher R. Anderson “Always be positive, strive for solutions, and never give up” President CEO Director 604-488-3900 – Dir
Posted by AGORACOM
at 5:30 PM on Friday, January 18th, 2019
107.5 g/t gold and 880 g/t silver over 6.90 meters core length
High-grade quartz vein intersection is near-surface, near high grade intersections of COD18-45, 46 and 67 indicating high grade ore shoot.
COD18-67: 129 g/t gold and 1,154 g/t silver over 7.28 meters
VANCOUVER, BC / ACCESSWIRE / January 18, 2019 / GGX Gold Corp. (TSX-v: GGX), (OTCQB: GGXXF), (FRA: 3SR2) (the “Company” or “GGX“)
is pleased to announce it has received drill core analytical results
for the final four drill holes (COD18-68 to COD18-71) of the November
2018 diamond drilling program at its Gold Drop Property near Greenwood,
southern British Columbia. Drill hole COD18-70 intersected near-surface
high-grade gold and silver with significant tellurium in the southwest
part of the COD quartz vein. This high-grade intersection is in
close-proximity to high-grade intersections in drill holes COD18-45, 46
and 67 indicating a high grade ore shoot. The mineralized COD vein
system has been traced by drilling and / or trenching for approximately
400 meters strike length and is open to the northeast, at depth and
possibly to the southwest. Highlights for COD18-70 include:
107.5
g/t gold and 880 g/t silver over 6.90 meters core length (multiple
samples greater than the upper 500 g/t analytical limit for tellurium).
High-grade
quartz vein intersection is near-surface (18 to 24 meters vertical
depth), near high grade intersections of COD18-45, 46 and 67 indicating
high grade ore shoot.
Part of
exploratory shallow drilling designed to define high-grade
mineralization and expand the understanding of controls on
mineralization.
The
November 2018 diamond drilling program (11 drill holes: COD18-61 to
COD18-71) tested the southwest region of the COD vein in an area of
high-grade gold and silver mineralization. The COD vein is located
within the Gold Drop Southwest Zone. Prior 2018 drill holes in this part
of the COD vein intersected near-surface high-grade gold and silver
mineralization. The COD vein strikes approximately northeast-southwest.
Intersections
exceeding 1 g/t gold for drill holes COD18-68 to COD18-71 are listed in
the table below. Since true widths cannot be accurately determined from
the information available the core lengths (meters) are reported.
Hole ID
From (m)
To (m)
Length (m)
Au (g/t)
Ag (g/t)
Te (g/t)
Description
COD18-68
19.49
22.25
2.76
8.77
85.4
56.3
Quartz vein and wall rock
COD18-68
incl. 20.86
22.35
1.39
14.47
131.8
87.9
Quartz vein and wall rock
COD18-69
19.75
20.42
0.67
1.24
9.59
6.55
quartz band
COD18-69
26.72
34.18
7.46
5.76
67.9
61.2
Quartz veins & wall rock; local quartz breccia
COD18-69
incl. 27.30
28.10
0.80
9.77
95
110
Quartz vein
COD18-69
incl. 31.20
31.60
0.40
70.9
569
278
Quartz vein with massive sulfide band
COD18-70
22.57
29.47
6.90
107.5
880
Quartz vein with tellurides
COD18-70
incl. 23.3
24.15
0.85
541
4532
>500
Quartz vein with tellurides
COD18-71
28.50
30.30
1.80
1.57
11.7
8.4
Alteration zone
Note: 1-meter core loss in COD18-70 between 22.57 – 29.47m.
All
November 2018 drill holes were collared within 25 meters of prior 2018
drill holes COD18-45 and COD-46, the objective to define the high-grade
mineralization in this part of the COD vein and to provide information
on the controls on mineralization. Drill holes COD18-45 and COD18-46,
drilled to the west at 45 and 50 degree-dips, intersected near-surface,
high grade gold and silver mineralization in the COD vein (News Releases
of August 15 and 22, 2018). Drill holes COD18-67and COD18-70, part of
the November 2018 program, intersected high grade gold and silver
mineralization in the same area. These holes were drilled slightly
northeast at dips of 50 degrees (COD18-67) and 54 degrees (COD18-70) to
intersect the COD vein at a shallower angle and test the continuity of
the quartz veining and high-grade mineralization. Highlights of these
four holes include (core length):
COD18-45: 50.1 g/t gold and 375 g/t silver over 2.05 meters (including 167.5 g/t gold, 1,370 g/t silver & >500 g/t tellurium over 0.46 meters).
COD18-46: 54.9 g/t gold and 379 g/t silver over 1.47 meters (including 223 g/t gold, 1,535 g/t silver & > 500 g/t tellurium over a 0.30 meters).
COD18-67: 129 g/t gold and 1,154 g/t silver over 7.28 meters (multiple samples exceeding upper 500 g/t analytical limit for tellurium).
COD18-70: 107.5 g/t gold and 880 g/t silver over 6.90 meters (multiple samples exceeding upper 500 g/t analytical limit for tellurium).
The
close-spaced intersections of COD18-45, 46, 67 and 70 all occur within
18-25 meters vertical depth indicating a high-grade ore shoot.
Analytical
results for drill holes COD18-61 to COD18-64 were reported in the
Company’s News Release of January 9, 2018, the highlight being 28.0 g/t
gold, 424.7 g/t silver and 150.4 g/t tellurium over 1.17 meters core
length in COD18-63. Analytical results for drill holes COD18-64 to
COD18-67 were reported in the Company’s News Release of January 11,
2019, the highlight being the intersection of 129 g/t gold and 1,154 g/t silver over 7.28 meters core length in COD18-67.
Holes
COD18-61 to COD18-66 were drilled to the west and slightly northwest at
dips of 45 to 60 degrees to intersect the approximately northeast
striking vein(s). Holes COD18-67 to COD18-71 were drilled at dips of 45
to 60 degrees slightly northeast to intersect the vein(s) at a shallower
angle, the objective being to test the continuity of the quartz veining
and mineralization. Although drill holes COD18-67 and COD18-70 were not
drilled perpendicular to the strike of the COD vein, they still show
the exceptional high-grade nature of the vein, possibly being, or
leading to, a “motherlode”-style feeder system. As the Company continues
reminding of the old saying “we drill for structure and we drift for
grade”, both holes indicate how potential drifting may encounter the
vein in case a potential production decision can be made in the future.
Drilling along veins at slight angles helps in locating possible “ore
shoots” and gaining a structural understanding of its vertical and
horizontal orientations/extensions for targeted follow-up drilling.
The
drill core was split with half core samples securely packaged and
delivered to ALS Canada Ltd. in Vancouver, BC. The core samples were
analyzed for gold by Fire Assay-Atomic Absorption and for 48 elements
(including silver and tellurium) by Four Acid – ICP-MS. Samples
exceeding 100 g/t gold were re-analyzed for gold by Fire Assay –
Gravimetric Finish. Samples exceeding 100 g/t silver were re-analyzed
for silver by Four Acid – ICP-AES. Samples exceeding 1,500 g/t silver by
Four Acid – ICP-AES were re-analyzed for silver by Fire Assay –
Gravimetric Finish. Quality control (QC) samples were inserted at
regular intervals.
Gold
and silver bearing quartz veins occur in multiple regions on the Gold
Drop property with high grade gold reported (samples exceeding 1 oz. /
ton gold reported).
Historic gold and silver production occurred at the Gold Drop, North Star, Amandy and Roderick Dhu vein systems.
David
Martin, P.Geo., a Qualified Person as defined by NI 43-101, is
responsible for the technical information contained in this News
Release.
To view the Original News release with pictures please go to the website or contact the company.
On Behalf of the Board of Directors, Barry Brown, Director 604-488-3900 [email protected]
Posted by AGORACOM
at 9:18 AM on Friday, January 18th, 2019
Drill results for holes 10 – 22 completed during 2018 exploration
Drilling conducted 1.5 km northwest of the historic Keymet Mine
Ky-18-14: 7.89% zinc equivalent over 34.3 m
GREAT ATLANTIC RESOURCES CORP. (TSXV.GR) (the “Company” or “Great Atlantic”) is pleased to announce it has received drill core analytical results for 13 holes (Ky-18-10 to Ky-18-22) completed during the 2018 diamond drilling program at its Keymet Base Metal – Precious Metal Property, located near Bathurst, northeast New Brunswick. The program was conducted in the northwest region of the property approximately 1.5 km northwest of the historic Keymet Mine. Highlights include (core length):
Ky-18-14: 7.89% zinc equivalent over 34.3 meters (From 46.20 m to 80.50 m)
Ky-18-10: 10.91% zinc equivalent over 3.27 meters (From 85.03m to 88.30 m)
Elmtree 12 vein: System traced to approximately 145 meters depth, open at depth
Elmtree 12 vein: Strike length of approximately 110 meters and open along strike
Vein with semi-massive sulfides in Drill Hole Ky-18-14 at Elmtree 12 Vein System
The
2018 drilling program (13 holes totalling 1,484 meters) was conducted
in the northwest region of the Keymet property. Eleven drill holes
(Ky-18-10 to Ky-18-18, Ky-18-21 and Ky-18-22) tested the Elmtree 12 vein
system as in-fill drilling and along strike with some holes testing
deeper than previous drilling. Company management speculate the Elmtree
12 vein system to be striking approximately north-south and
sub-vertical. Great Atlantic had previously drilled six holes in the
Elmtree 12 vein system during 2015 and 2017, intersecting zinc, copper,
lead and silver bearing polymetallic veins (News Releases of February
23, 2016, December 20, 2017 and March 2, 2018). Two drill holes
(Ky-18-19 and Ky-18-20) tested the continuation of another base metal
and silver bearing vein southwest of the Elmtree 12 vein system. This
vein was discovered during 2017 drilling (Ky-17-8: 18.8% Zn, 3.5% Cu and
576 g/t Ag over 1.27 meters core length – News Release of March 2,
2018).
Sulfide Bearing Veins in Drill Hole Ky-18-14 at Elmtree 12 Vein System
Intersections
from 2015, 2017 and 2018 diamond drilling programs in the area of the
Elmtree 12 vein system include the following (core length):
Hole ID
From (m)
To (m)
Length (m)
Zn Equiv. (%)
Zn (%)
Cu (%)
Pb (%)
Ag (g/t)
Au (g/t)
2015 Diamond Drill Holes:
Ky-15-3
30.10
32.20
2.10
3.28
Ky-15-3
60.80
62.60
1.80
22.77
16.68
1.11
0.44
152
Ky-15-4
90.07
94.35
4.28
10.44
8.68
0.29
0.2
44.8
2017 Diamond Drill Holes:
Ky-17-5
81.00
81.80
0.80
20.24
13.65
1.20
0.45
166
Ky-17-6
119.45
131.50
12.05
8.31
3.54
0.92
0.28
115.6
Ky-17-6
incl. 119.45
124.40
4.95
16.05
7.67
1.57
0.48
209.3
Ky-17-6
148.80
149.75
0.95
4.9
Ky-17-6
164
183.96
19.96
0.64
Ky-17-8
31.00
32.27
1.27
39.90
18.8
3.55
1.16
576
Ky-17-9
45.75
47.13
1.38
6.29
4.29
0.29
0.23
55.4
2018 Diamond Drill Holes:
Ky-18-10
85.03
88.30
3.27
10.91
7.91
0.53
0.21
77.2
Ky-18-10
incl. 85.74
86.74
1.00
25.59
16.80
1.60
0.55
223
Ky-18-11
108.70
109.40
0.70
4.95
3.89
0.11
0.14
33.9
Ky-18-12
78.82
84.55
5.73
7.88
4.07
1.19
0.23
39.2
Ky-18-12
incl. 78.82
79.64
0.82
14.03
10.90
1.07
0.09
24.8
Ky-18-12
incl. 83.35
84.55
1.20
21.65
8.90
3.81
0.60
157
Ky-18-13
80.00
81.00
1.00
1.76
Ky-18-14
46.20
80.50
34.30
7.89
3.29
0.88
0.26
112.6
Ky-18-14
incl. 46.20
49.20
3.00
56.23
9.04
9.19
2.16
1158
Ky-18-14
incl. 62.48
63.00
0.52
18.49
15.45
0.96
0.13
32
Ky-18-14
incl. 67.00
67.60
0.60
13.59
13.05
0.09
0.05
14
Ky-18-14
incl. 76.00
80.50
4.50
14.27
12.08
0.31
0.30
59.8
Ky-18-16
77.20
77.72
0.52
33.48
4.47
7.85
0.72
478
Ky-18-17
10.43
11.00
0.57
11.72
6.37
0.10
6.08
14.5
Ky-18-17
67.00
67.50
0.50
7.23
6.05
0.21
0.15
27.5
Ky-18-18
72.50
73.50
1.00
2.74
2.04
0.09
0.11
19.6
Ky-18-19
13.02
13.72
0.70
1.05
Ky-18-20
32.00
32.28
0.28
10.75
2.39
1.82
0.87
164
Ky-18-21
145.50
147.00
1.50
8.26
2.31
0.89
0.81
156.6
Zinc
equivalent (% Zn Equiv.) values for drill hole intersections are based
on the following metal prices (as of January 16, 2019): Zinc US$2,467 /
tonne (US$1.119 / lb.), Lead US$1,953 / tonne (US$0.886 / lb.), Copper
US$5,881 / tonne (US$2.668 / lb.) and Silver US$15.605 per troy ounce.
Metal recoveries of 100% were applied in the zinc equivalent
calculations. The zinc equivalent calculation is as follows: Zn Equiv. =
100 x ((Ag Price in grams x Ag Grade) + (Pb Price x 2204.6 x Pb Grade
(%) / 100) + (Cu Price x 2204.6 x Cu Grade (%) / 100) + (Zn Price x
2204.6 x Zn Grade (%) / 100)) / Zn Price x 2204.6.
Drill holes
Ky-18-10 to Ky-18-13 were in-fill holes drilled east to slightly
southeast at 45 to 57 degree dips. Drill holes Ky-18-14, Ky-18-21 and
Ky-18-22 were collared closer to the vein system and at steeper dips
(78-83 degrees) to intersect the vein system at a shallower angle to
test continuity of mineralization along dip, locate possible ore shoots
and gain a structural understanding of the vein’s vertical and
horizontal orientations / extensions for targeted follow-up drilling.
Hole Ky-18-21, drilled under Ky-18-14, tested the zone deeper. The
mineralized intersection at 145.5-147 meters in this hole is the deepest
intersection by the Company in the Elmtree 12 vein system and indicates
the system is open at depth at this location. This interval also
returned anomalous values for cobalt, including 0.07% Co over 1.0 meter
core length.
The meta-sediments in the lower half of Ky-18-22 are intruded my mafic dykes, possibly cutting the vein system.
Drill
holes Ky-18-15 and Ky-18-16 tested the extension of the Elmtree 12 vein
system to the north. Ky-18-15 was drilled slightly northwest
(approximate 55 degree dip). Ky-18-16 was drilled slightly southwest
(approximate 73 degree dip). The metal rich intersection in Ky-18-16
indicates the mineralized system is open to the north at slightly deeper
levels.
Drill holes Ky-18-17 and Ky-18-18 tested the Elmtree 12
vein system south of previous Company drilling. Mineralized veins and /
or alteration was intersected in both holes, indicating the mineralized
system to be open to the south.
Drill holes Ky-18-19 and Ky-18-20
were located southwest of the known extent of the Elmtree 12 vein
system. These holes tested the extension of the high grade vein
intersected in 2017 hole Ky-17-8. Ky-18-19 was drilled slightly
northwest at an approximate 66 degree dip to intersect the vein deeper.
Hole Ky-18-19 did not confirm the down-dip extension of the mineralized
vein. Hole Ky-18-20 was drilled southwest at an approximate 55 degree
dip. This hole intersected a near-surface narrow copper, lead, zinc and
silver bearing zone (approximate 26 meters vertical depth) approximately
10 meters south of the high grade vein intersection of hole Ky-17-8.
Drill
core from the 2018 program was geologically logged and sampled at a
secure location in Miramichi, New Brunswick. Drill core samples were
submitted to ALS Canada for gold analysis (Fire Assay-AA) and for 33
element analysis (including copper, lead, zinc and silver) by Four Acid
and ICP-AES. Samples exceeding 1,500 g/t silver were re-analyzed for
silver by Fire Assay-Gravimetric Finish. Quality Control samples were
included as part of the sample submission. A Qualified Person verified
the 2015, 2017 and 2018 exploration data for Great Atlantic. The
Qualified Person managed these exploration programs at the Keymet
Property.
Historic Keymet Mine (1950s)
The
Company’s focus since acquiring the Keymet Property has been the
northwest region of the property in the area of reported polymetallic
veins with most work in the area of the Elmtree 12
copper-lead-zinc-silver bearing vein system. At least seven vein
occurrences with lead, zinc and +/- copper, silver and gold are reported
in this region of the property in addition to the polymetallic veins
reported at the historic Keymet Mine (source: New Brunswick Dept. of
Energy and Resource Development Mineral Occurrence Database). The Keymet
Mine operated during the mid-1950s, producing copper, lead, zinc and
silver. Production at this mine was terminated due to a fire at the
site.
Significant
precious metal – base metal deposits are reported within 4 km of the
Keymet Property. The Elmtree gold deposits are located within 3 km
west-southwest of the Keymet Property. The historic Nigadoo River Mine
is located approximately 4 km south of the Keymet Property. Polymetallic
massive sulfide veins were mined at the Nigadoo River Mine during the
1960s and 1970s with copper, lead, zinc and silver being produced. The
N.B Dept. of Energy and Resource Development Mineral Occurrence Database
reports shaft depth and production totals at this historic mine.
Production during 1967-1971 is reported as 1.126 million tonnes at 2.2%
Pb, 2.1% Zn, 0.24% Cu and 92.57 g/t Ag. Production during 1973-1977
(after a 2 year closure) is reported to be 0.733 million tonnes (only
partial metal grades reported). The shaft is reported to at least 470
meter deep.
The Nash Creek Zinc Project of Callinex Mines Inc. is
located approximately 15 kilometers northwest of the Keymet Property.
Callinex Mines Inc. recently filed a 43-101 Technical Report (effective
date March 21, 2018) which was completed by Tetra Tech Canada Inc. The
report includes updated mineral resource estimates for the Nash Creek
Zinc Project (Hickey and Hayes Zones) using a 1.5% Zn Equiv. cut-off.
This included 13,592,000 tonnes indicated estimated resources at 2.68%
Zn, 0.58% Pb and 17.8 g/t Ag; and 5,929,000 tonnes inferred estimated
resources at 2.68% Zn, 0.47% Pb and 13.9 g/t Ag (source: Callinex Mines
Inc. Website).
Readers are warned that mineralization at the
Elmtree gold deposits, historic Nigadoo River Mine and Nash Creek Zinc
Project is not necessarily indicative of mineralization on the Keymet
Property.
Access to the Keymet Property is excellent with paved
roads transecting the property, including a provincial highway. The
property covers an area of approximately 3,400 hectares and is 100%
owned by the Company.
Readers are warned that historical records
referred to in this News Release have been examined but not verified by a
Qualified Person. Further work is required to verify that historical
records referred to in this News Release are accurate.
David
Martin, P.Geo., a Qualified Person as defined by NI 43-101 and VP
Exploration for Great Atlantic, is responsible for the technical
information contained in this News Release.
On Behalf of the board of directors
“Christopher R Anderson“
Mr. Christopher R Anderson ” Always be positive, strive for solutions, and never give up “ President CEO Director 604-488-3900 – Dir
About Great Atlantic Resources Corp.: Great
Atlantic Resources Corp. is a Canadian exploration company focused on
the discovery and development of mineral assets in the resource-rich and
sovereign risk-free realm of Atlantic Canada, one of the number one
mining regions of the world. Great Atlantic is currently surging forward
building the company utilizing a Project Generation model, with a
special focus on the most critical elements on the planet that are
prominent in Atlantic Canada, Antimony, Tungsten and Gold.
Posted by AGORACOM
at 10:34 AM on Wednesday, January 16th, 2019
Developed new Graphene Ultra Fuel Efficient Tires (GUET)
Certification and terrain testing targeted for completion in Q3, 2019
The automotive tire market is large and is expected to grow to 2.5 billion tires by 2022
The GUET tire market represents a very large vertical for Gratomic which the Company will be vigorously pursuing in 2019, and beyond
Gratomic Inc. (“Gratomic†or the “Companyâ€) (TSX-V: GRAT) (CB81-FRANKFURT) a
vertically integrated graphite to graphenes, advanced materials company
is pleased to announce the development of Gratomic’s new Graphene Ultra
Fuel Efficient Tires (GUET) with certification and terrain testing targeted for completion in Q3, 2019.
“Purely from a demand perspective, we have been pulled into a market which represents a very large opportunity for Gratomic. Simply put, our customers want what we have; high quality
graphene. Not only are Hybrid Graphene enhanced tires fuel efficient,
but they can also demonstrate better handling and longer life†commented
Gratomic’s Chairman and Co-CEO Sheldon Inwentash. “The GUET tire market represents a very large vertical for Gratomic which the Company will be vigorously pursuing in 2019, and beyond.â€
Gratomic recognizes the automotive tire market is large and is expected to grow to 2.5 billion tires by 2022. Gratomic looks to penetrate and disrupt the traditional means of tire production by providing graphene enabled
GUET tires. To date, the global tire market has recognized that
employing graphenes within tire treads, walls and the inner linings can
make tires lighter, provide better grip and reduce rolling resistance to
an extent that is not possible with existing tire compounds. On
average, this would require 20 to 25 grams of graphene per tire.
However, for the Industry, specification consistency and scaleability of supply have been limiting factors and to date have been the biggest constraints in commercializing Graphene.
Attributed
to the right combination of geology at the mine and our processing
partner, Gratomic strongly believes it can satisfy the supply demand of quality graphenes required for what the Company believes is the growing market demand for a new age economy tire. Gratomic is confident in its ability to deliver consistent quality and quantities of Graphenes to end users.
Gratomic
has been able to achieve this through a unique collaboration agreement
with its development partner Perpetuus Carbon Technologies who currently
supplies
substantial quantities of surface modified graphenes on a monthly basis
to the tire industry through its Patented Plasma Process.
Ian Walters Director – Perpetuus Carbon Technologies Limited stated:
“Perpetuus’ investigative analysis and characterization has concluded that the Graphenes derived from the Gratomic mine are highly friable, more so than any other graphite tested for purpose
by the Perpetuus Labs. The liberated graphenes when functionalized have
demonstrated excellent processability. Initial application in a host of
end uses has demonstrated excellent suitability for a range of
products. Most noteworthy are the excellent results generated when the
Hybrid Graphenes are included in elastomers for tire construction.
Perpetuus looks forward to working with Gratomic to launch probably the first range of Graphene enabled ultra fuel efficient tires.â€
Employing
its dedicated facility for the patented Perpetuus plasma method
Gratomic post plasma processing produces graphenes (less than 10 layers)
of a high purity (CK 99.10%) derived from its Graphite Mine in Namibia.
Website:
Gratomic is pleased to advise shareholders that the Company’s website has been updated. Please visit www.gratomic.ca.
About Perpetuus Carbon Technologies.
Perpetuus
is the world’s largest producer of plasma surface engineered graphenes
formulated for specific end uses with a capacity in excess of 100’s of
tonnes per annum. The company has a lab to commercialization facility
based at its two premises in South Wales UK. Cycle and car tires
enhanced with Perpetuus graphenes are currently and simultaneously being
road tested on bikes, light commercial vehicles and taxis in Asia and
Europe and are used on a daily basis. Perpetuus surfaced engineered
graphenes are currently being introduced into development programmes for
aircraft and industrial tires.
About Gratomic Inc.
Gratomic is an advanced materials company focused on mine to market commercialization of graphite products most notably high value graphene-based components for a range of mass market
products. We are collaborating with a leading European manufacturer of
graphenes to use Aukam graphite to manufacture graphene products for
commercialization on an industrial scale. The company is listed on the
TSX Venture Exchange under the symbol GRAT.
For more information: visit the website at www.gratomic.ca or contact:
Arno Brand, Co-CEO, +1 416-561-4095 E-mail inquiries: [email protected]
